XTP T UWP 302 是一款 2 路输入发送器，可通过单根 CATx 屏蔽电缆发送 HDMI 或VGA 视频、音频以及双向 RS-232 和红外信号至 100 m ( 330') 远的距离。该 XTP ® 发送器支持分辨率高达 1920x1200 的计算机和视频信号，包括 1080p/60 深色和 2K。它可将输入的模拟视频信号数字化，用于可靠的传输，分离的模拟立体声音频传输也可加嵌到 XTP 信号。其特性包括各路输入之间可选择优先级的自动切换，从而方便地在未托管的地方进行操作，以及用于远程设备控制的双向 RS-232 和红外插入功能。XTP T UWP 302 设计用于 XTP Systems ® ，通过 XTP CrossPoint ® 矩阵切换器供电。XTP T UWP 302 可安装在三单元接线盒中，提供便利接入的同时能同环境融为一体。
| 兼容的输入/输出板 | ||
|---|---|---|
| XTP CP 输入/输出板 | 带 RS-232 和红外插入的 XTP 发送器和接收器板 | |
| 相兼容的接收器 | ||
|---|---|---|
| XTP R HWP 201 | 适用于墙面安装型显示器的 XTP 接收器，带 90° HDMI 连接器 | |
| 可选附件 | ||
|---|---|---|
| XTP DTP 24 | 用于 XTP Systems 和 DTP Systems 的屏蔽双绞线电缆 | |
| XTP DTP 24 插头 | 用于 Extron XTP DTP 24 屏蔽双绞线电缆的屏蔽 RJ-45 插头套件 | |
| XTP DTP 24 打线式插座 | 用于 Extron XTP DTP 24 屏蔽双绞线电缆的屏蔽 RJ-45 打线式插座套件 | |
| XTP DTP 24 耦合器 | 用于 Extron XTP DTP 24 屏蔽双绞线电缆的屏蔽 RJ-45 耦合器 | |
| XTP PI 100 | 用于 XTP 和 Pro 系列控制系统的电源合路器 | |
| XTP PI 400 | 用于 XTP 和 Pro 系列控制系统的四端口电源合路器 | |
| HDMI Ultra 系列 | 超柔韧极高速 HDMI 电缆 | |
| CTU 45 | 通用型 RJ-45 端接工具 | |
XTP T UWP 302 是一款 2 路输入发送器，可通过单根 CATx 屏蔽电缆发送 HDMI 或VGA 视频、音频以及双向 RS-232 和红外信号至 100 m ( 330') 远的距离。该 XTP ® 发送器支持分辨率高达 1920x1200 的计算机和视频信号，包括 1080p/60 深色和 2K。它可将输入的模拟视频信号数字化，用于可靠的传输，分离的模拟立体声音频传输也可加嵌到 XTP 信号。其特性包括各路输入之间可选择优先级的自动切换，从而方便地在未托管的地方进行操作，以及用于远程设备控制的双向 RS-232 和红外插入功能。XTP T UWP 302 设计用于 XTP Systems ® ，通过 XTP CrossPoint ® 矩阵切换器供电。XTP T UWP 302 可安装在三单元接线盒中，提供便利接入的同时能同环境融为一体。
特性
安装在标准三单元接线盒中
通过单根 CATx 屏蔽电缆传输 HDMI 或数字化模拟视频、音频以及双向 RS-232 和红外信号至 100 m 远的距离
HDMI 和 VGA 输入
支持分辨率高达 1920x1200 的计算机和视频信号，包括 1080p/60 深色和 2K
兼容 CATx 屏蔽双绞线电缆
强烈建议使用 Extron XTP DTP 24 屏蔽双绞线电缆，以达到最佳的性能表现
各路输入之间的自动切换
模拟视频格式的数字转换
用于视音频设备控制的双向 RS-232 和红外插入
支持 HDMI 参数标准，包括高达 6.75 Gbps 的数据速率、高达 12 位的色深、3D 和高清无损的音频格式
符合 HDCP 标准
EDID 管理器 (EDID Minder ® ) 自动地管理已连接设备之间的 EDID 通信
密钥管理器 (Key Minder ® ) 持续地验证 HDCP 标准，用于快速、可靠的切换
支持远程供电
支持多种嵌入的音频格式
RS-232 控制
可选择的模拟立体声音频输入加嵌
音频输入增益及衰减
支持 EDID 和 HDCP 传输
显示信号存在、HDCP 和电源状态的 LED 指示灯
用于 RJ-45 型 XTP 端口的信号和链接状态 LED 指示灯
兼容所有的 XTP 产品
前面板 USB 配置端口
随附 LockIt ® HDMI 电缆紧固托架
示意图
面板图
| XTP T UWP 302 | |||
|
|||
|
|||
| Video | |||
|---|---|---|---|
| Gain | Unity | ||
| Resolution range | |||
| Digital | Up to 1920x1200*, 2K, or 1080p (HDTV) * reduced blanking |
||
| Analog | Up to 1920x1200* or 1080p (HDTV) * reduced blanking |
||
| Signal type | Single-link HDMI (or DVI-D*) | ||
| Digital video | RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single-link DVI (if using an optional adapter) and HDMI standards from 640x480 @ 60 Hz to1900x1200 @ 60 Hz) | ||
| EDID and DDC | Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered. | ||
| HDCP | Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI standards | ||
| HPD | Supports hot plug detection (HPD) of display as a pass-through signal. | ||
| Maximum data rate | 6.75 Gbps (2.25 Gbps per color) | ||
| Maximum pixel clock | 165 MHz | ||
| Formats | RGB and YCbCr digital video | ||
| Standards | DVI 1.0, HDMI, HDCP 1.1 | ||
| Video input | |||
| Number/signal type | 1 analog RGBHV 1single link HDMI (DVI-D or DisplayPort*) input |
||
| Connectors | 1 female 15-pin HD 1female HDMI type A |
||
| Nominal level | 0.7 Vp-p for RGB | ||
| Minimum/maximum levels | 0.3 V to 1.45 V p-p | ||
| Impedance | 75 ohms | ||
| Horizontal frequency | 30 kHz to 100 kHz | ||
| Vertical frequency | 24 Hz to 120 Hz | ||
| Interconnection between transmitter and receiver | |||
| Connectors | 1 female RJ-45 per unit | ||
| Termination standards | TIA/EIA T568B | ||
| Signal transmission distance | 330' (100 m) using shielded twisted pair or XTP DTP 24 cable | ||
| Cable requirements | Solid conductor, 24 AWG or better | ||
| Cable recommendations | 400 MHz bandwidth, STP (Shielded Twisted Pair) | ||
|
|||
| Audio | |||
| Gain | |||
| Range | -18 dB to +24 dB | ||
| Default | Unbalanced output: 0 dB; balanced output +6 dB | ||
| Frequency response | 20 Hz to 20 kHz, ±0.05 dB | ||
| THD + Noise | 0.01% @ 1 kHz at nominal level | ||
| S/N | >90 dB, at maximum output, balanced (unweighted) | ||
| Crosstalk | <-45 dB @ 20 kHz, -72 dB @ 1 kHz or below | ||
| Stereo channel separation | >80 dB @ 20 Hz to 20 kHz | ||
| Sampling rates | 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz | ||
| Bit depths | 16, 20, 24 bit | ||
| Audio input | |||
| Number/signal type | 1 analog stereo, unbalanced or 1digital audio, embedded from HDMI |
||
| Connectors | 1 female 3.5 mm mini audio jack 1female HDMI type A (shared with video input) |
||
| Source formats | LPCM up to 7.1/24-bit/192 kHz, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel | ||
| Impedance | >10k ohms, unbalanced, DC coupled | ||
| Nominal level | +4 dBu (1.23 mVrms) balanced or -10 dBV (316 mVrms) unbalanced | ||
| Maximum level | +7 dBv unbalanced | ||
|
|||
| Communications — transmitter | |||
| Serial control port | 1 bidirectional RS-232: 1 rear panel 3.5 mm captive screw connector, 3 pole | ||
| Baud rate and protocol | 9600 (default) to 115200 baud, 8 data bits, 1 stop bit, no parity | ||
| Serial control pin configuration | 1 = Tx, 2 = Rx, 3 = GND | ||
| USB control ports | 1 side panel female mini USB B | ||
| USB standards | USB 2.0, low speed | ||
| Program control | Extron control/configuration program for Windows ® Extron Simple Instruction Set (SIS ™ ) |
||
| Communications — external device (pass-through, unidirectional or bidirectional) | |||
| Serial control port input/output | RS-232 (±5 V) via (1) 3.5 mm, 5 pole captive screw connector (uses 3 poles) (connector is shared with IR control port) | ||
| Serial control port output/input | 1 set of proprietary signals on a female RJ-45 jack | ||
| Baud rates | Up to 115200 baud | ||
| Protocol | Data bits = 5 - 8 Stop bits = 1 or 2 Parity = odd, even, none Flow control = XON, XOFF, none |
||
| Serial control pin configuration | 1 = Tx, 2 = Rx, 3 = GND | ||
| IR control port | (1) 3.5 mm, captive screw connector, 5 pole (connector is shared with RS-232 control port) TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 40 kHz |
||
| IR control pin configuration | 3 = GND, 4 = IR Tx, 5 = IR Rx | ||
| General | |||
| Power supply | External Input: 100 to 240 VAC, 50-60 Hz Output:12 VDC,1 A, 12 watts |
||
| Power consumption | |||
| Device | 7.9 watts, 12 VDC | ||
| Device and power supply | 9.0 watts, 100-240 VAC, 50-60 Hz | ||
|
|||
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +104 °F (0 to +40 °C) / 10% to 90%, noncondensing |
||
| Cooling | Convection, no vents | ||
| Thermal dissipation | |||
| Device | 25.9 BTU/hr | ||
| Device and power supply | 29.4 BTU/hr | ||
| Mounting | |||
| Furniture or wall mount | Yes, with a US 3-gang electrical junction box | ||
| Enclosure type | Metal | ||
| Enclosure dimensions | |||
| Faceplate | 4.5" H x 6.4" W x 0.1" D (3-gang) (11.5 cm H x 16.3 cm W x 0.3 cm D) |
||
| Device | 2.5" H x 5.1" W x 1.9" D (6.4 cm H x 13.0 cm W x 4.9 cm D) (Depth excludes connectors. Fits some 3-gang boxes.) |
||
| Product weight | 0.7 lbs (0.3 kg) | ||
| Shipping weight | 3 lbs (1 kg) | ||
| Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
| Regulatory compliance | |||
| Safety | CE, c-UL, UL | ||
| EMI/EMC | CE**, C-tick, FCC Class A**, ICES, VCCI | ||
| Environmental | Complies with the appropriate requirements of RoHS, WEEE. | ||
|
|||
| Warranty | 3 years parts and labor | ||
|
|||
|
|||
| (8.1-082114-D5) | |||
| 可选附件 | ||
|---|---|---|
| XTP DTP 24 | 用于 XTP Systems 和 DTP Systems 的屏蔽双绞线电缆 | |
| XTP DTP 24 插头 | 用于 Extron XTP DTP 24 屏蔽双绞线电缆的屏蔽 RJ-45 插头套件 | |
| XTP DTP 24 打线式插座 | 用于 Extron XTP DTP 24 屏蔽双绞线电缆的屏蔽 RJ-45 打线式插座套件 | |
| XTP DTP 24 耦合器 | 用于 Extron XTP DTP 24 屏蔽双绞线电缆的屏蔽 RJ-45 耦合器 | |
| XTP PI 100 | 用于 XTP 和 Pro 系列控制系统的电源合路器 | |
| XTP PI 400 | 用于 XTP 和 Pro 系列控制系统的四端口电源合路器 | |
| HDMI Ultra 系列 | 超柔韧极高速 HDMI 电缆 | |
| CTU 45 | 通用型 RJ-45 端接工具 | |
中国上海市松江区茸华路 686 号
(联系就说在DAV音视工程网上看到的)
Sales-China@Extron.com
021-3760 1566
爱思创电子（上海）有限公司（爱思创Extron中国）全球总部位于美国加州，是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、分配放大器、音频放大器、扬声器、双绞线和光纤设备、视频图像解析度转换器、视音频信号处理器、视音频流媒体产品、教室声场系统及高分辨率电缆。爱思创Extron电子提供专业视音频工程、培训、设计、演示支持。
DAV首页