SMX USB 矩阵板设计用于将多达 8 个主机 CPU 路由至 1 个或多个 USB 外围设备，如键盘和鼠标。它们支持高达 480 Mbps 的数据传输速率，并兼容 USB 2.0/1.1/1.0 标准。所有接口都提供主机和外围设备仿真功能，即使未与已连接的设备相关联，仍能够可靠、无故障地启动。4 个集成的两端口 USB 集线器简化了常见的键盘/鼠标应用集成。每一个集线器端口都提供了 5 V、500 mA 的电源，用于相连的键盘、鼠标或其它外围设备。SMX USB 矩阵切换器板与可用的 SMX DVI、HDMI 或 VGA 矩阵切换板配合使用时，非常适用于由 KVM（键盘、视频、鼠标）组成的矩阵应用环境。SMX USB 矩阵板提供两种输入/输出尺寸：4x4 和 8x4。
SMX USB 矩阵板设计用于将多达 8 个主机 CPU 路由至 1 个或多个 USB 外围设备，如键盘和鼠标。它们支持高达 480 Mbps 的数据传输速率，并兼容 USB 2.0/1.1/1.0 标准。所有接口都提供主机和外围设备仿真功能，即使未与已连接的设备相关联，仍能够可靠、无故障地启动。4 个集成的两端口 USB 集线器简化了常见的键盘/鼠标应用集成。每一个集线器端口都提供了 5 V、500 mA 的电源，用于相连的键盘、鼠标或其它外围设备。SMX USB 矩阵切换器板与可用的 SMX DVI、HDMI 或 VGA 矩阵切换板配合使用时，非常适用于由 KVM（键盘、视频、鼠标）组成的矩阵应用环境。SMX USB 矩阵板提供两种输入/输出尺寸：4x4 和 8x4。
特性
兼容 USB 2.0
支持高达 480 Mbps 的数据传输速率
主机和外围设备仿真模式
每路输出上集成的两端口集线器提供 5 V、 500 mA 的电源
示意图
面板图
| SMX System MultiMatrix Switchers | |||
| Video — composite video (SMX 84/88/1616 V) | |||
|---|---|---|---|
| Routing | |||
| SMX 84 V | 8 x 4 matrix | ||
| SMX 88 V | 8 x 8 matrix | ||
| SMX 1616 V | 16 x 16 matrix | ||
| Gain | Unity | ||
| Bandwidth | 150 MHz (-3 dB), fully loaded | ||
| Differential phase error | 1.0° at 3.58 MHz and 4.43 MHz | ||
| Differential gain error | 1.0% at 3.58 MHz and 4.43 MHz | ||
| Crosstalk | -60 dB @ 5 MHz | ||
| Switching speed | 100 ms (max.) | ||
| Video input — composite video (SMX 84/88/1616 V) | |||
| Number/signal type | 8 or 16 composite video, S/PDIF digital audio (not reclocked) | ||
| Connectors | 8 or 16 female BNC | ||
| Nominal level | 1 Vp-p for composite video | ||
| Minimum/maximum levels | Analog: 0.1 V to 2.0 Vp-p with no offset | ||
| Impedance | 75 ohms | ||
| Return loss | <-40 dB @ 5 MHz | ||
| DC offset (max. allowable) | 1.0 V | ||
| Video output — composite video (SMX 84/88/1616 V) | |||
| Number/signal type | 4, 8, or 16 composite video, S/PDIF digital audio (not reclocked) | ||
| Connectors | 4, 8, or 16 female BNC | ||
| Nominal level | 1 Vp-p for composite video | ||
| Minimum/maximum levels | 0.1 V to 2.0 Vp-p (follows input) | ||
| Impedance | 75 ohms | ||
| Return loss | <-40 dB @ 5 MHz | ||
| DC offset | ±5 mV with input at 0 offset | ||
| Sync — composite video (SMX 84/88/1616 V) | |||
| Standards | NTSC 3.58, NTSC 4.43, PAL, SECAM | ||
| Video — S-video (SMX 84/88/1616 SV, SMX 84/88/1616 YC) | |||
| Routing | |||
| SMX 84 SV/YC | 8 x 4 matrix | ||
| SMX 88 SV/YC | 8 x 8 matrix | ||
| SMX 1616 SV/YC | 16 x 16 matrix | ||
| Gain | Unity | ||
| Bandwidth | 150 MHz (-3 dB), fully loaded | ||
| Differential phase error | 1.0° at 3.58 MHz and 4.43 MHz | ||
| Differential gain error | 1.0% at 3.58 MHz and 4.43 MHz | ||
| Crosstalk | -60 dB @ 5 MHz | ||
| Switching speed | 100 ms (max.) | ||
| Video input — S-video (SMX 84/88/1616 SV, SMX 84/88/1616 YC) | |||
| Number/signal type | 8 or 16 S-video, composite video | ||
| Connectors | |||
| SMX 84/88/1616 SV | 8 or 16 female 4-pin mini DIN | ||
| SMX 84/88/1616 YC | 8 or 16 x 2 female BNC | ||
| Nominal level | 1 Vp-p for Y S-video 0.3 Vp-p for C of S-video |
||
| Minimum/maximum levels | Analog: 0.1 V to 2.0 Vp-p with no offset | ||
| Impedance | 75 ohms | ||
| Return loss | <-40 dB @ 5 MHz | ||
| DC offset (max. allowable) | 1.0 V | ||
| Video output — S-video (SMX 84/88/1616 SV, SMX 84/88/1616 YC) | |||
| Number/signal type | 4, 8, or 16 S-video, composite video | ||
| Connectors | |||
| SMX 84/88/1616 SV | 4, 8, or 16 female 4-pin mini DIN | ||
| SMX 84/88/1616 YC | 4, 8, or 16 x 2 female BNC | ||
| Nominal level | 1 Vp-p for Y S-video 0.3 Vp-p for C of S-video |
||
| Minimum/maximum levels | 0.1 V to 2.0 Vp-p (follows input) | ||
| Impedance | 75 ohms | ||
| Return loss | <-40 dB @ 5 MHz | ||
| DC offset | ±5 mV with input at 0 offset | ||
| Sync — S-video (SMX 84/88/1616 SV, SMX 84/88/1616 YC) | |||
| Standards | NTSC 3.58, NTSC 4.43, PAL, SECAM | ||
| Video — wideband (SMX 84/88/1616 WB) | |||
| Routing | |||
| SMX 84 WB | 8 x 4 matrix | ||
| SMX 88 WB | 8 x 8 matrix | ||
| SMX 1616 WB | 16 x 16 matrix | ||
| Gain | Unity | ||
| Bandwidth | 400 MHz (-3 dB), fully loaded | ||
| Crosstalk | |||
| 8x8 | -82 dB @ 1 MHz, -72 dB @5 MHz, -68 dB @ 10 MHz, -61 dB @ 30 MHz, -53 dB @ 100 MHz | ||
| 16x16 | -74 dB @ 1 MHz, -64 dB @ 5 MHz, -56 dB @ 10 MHz, -48 dB @ 30 MHz, -38 dB @ 100 MHz | ||
| Switching speed | 200 ms (max.) | ||
| Video input — wideband (SMX 84/88/1616 WB) | |||
| Number/signal type | 8 or 16 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video, S/PDIF digital audio (not reclocked) | ||
| Connectors | 8 or 16 female BNC | ||
| Nominal level | 0.7 Vp-p for RGB | ||
| Minimum/maximum levels | Analog: 0.3 V to 1.5 Vp-p with no offset | ||
| Impedance | 75 ohms | ||
| Horizontal frequency | 15 kHz to 150 kHz | ||
| Vertical frequency | 30 Hz to 150 Hz | ||
| Return loss | <-30 dB @ 5 MHz | ||
| DC offset (max. allowable) | 1.0 V | ||
| Video output — wideband (SMX 84/88/1616 WB) | |||
| Number/signal type | 4, 8, or 16 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video, S/PDIF digital audio (not reclocked) | ||
| Connectors | 4, 8, or 16 female BNC | ||
| Nominal level | 0.7 Vp-p for RGB | ||
| Minimum/maximum levels | 0.3 V to 1.5 Vp-p (follows input) | ||
| Impedance | 75 ohms | ||
| Return loss | <-30 dB @ 5 MHz | ||
| DC offset | ±5 mV with input at 0 offset | ||
| Switching type | Triple-Action | ||
| Sync — SMX 88 SYNC, SMX 88 H+V, SMX 1616 SYNC | |||
| Input type | |||
| SMX 88 SYNC, SMX 1616 SYNC | Composite sync (S) | ||
| SMX 88 H+V | Separate H and V sync | ||
| Output type (follows input) | |||
| SMX 88 SYNC, SMX 1616 SYNC | Composite sync (S) | ||
| SMX 88 H+V | Separate H and V sync | ||
| Input level | 0.5 V to 5.0 Vp-p, 4.0 Vp-p normal | ||
| Output level | AGC to TTL: 4.0 V to 5.0 V p-p, unterminated | ||
| Input impedance | 510 ohms | ||
| Output impedance | 75 ohms | ||
| Horizontal frequency | 15 kHz to 150 kHz | ||
| Vertical frequency | 30 Hz to 150 Hz | ||
| Max. propagation delay | 35 ns | ||
| Max. rise/fall time | 4 ns | ||
| Polarity | Positive or negative (follows input) | ||
| Video — VGA (SMX 84/88/1616 VGA) | |||
| Routing | |||
| SMX 84 VGA | 8 x 4 matrix | ||
| SMX 88 VGA | 8 x 8 matrix | ||
| SMX 1616 VGA | 16 x 16 matrix | ||
| Gain | Unity | ||
| Bandwidth | 350 MHz (-3 dB), fully loaded | ||
| Crosstalk | |||
| 8x8 | -82 dB @ 1 MHz, -72 dB @5 MHz, -68 dB @ 10 MHz, -61 dB @ 30 MHz, -53 dB @ 100 MHz | ||
| 16x16 | -74 dB @ 1 MHz, -64 dB @5 MHz, -56 dB @ 10 MHz, -48 dB @ 30 MHz, -38 dB @ 100 MHz | ||
| Switching speed | 200 ms (max.) | ||
| Video input — VGA (SMX 84/88/1616 VGA) | |||
| Number/signal type | 8 or 16 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video | ||
| Connectors | 8 or 16 female 15-pin HD | ||
| Nominal level | 0.7 Vp-p for RGB | ||
| Minimum/maximum levels | Analog: 0.3 V to 1.5 Vp-p with no offset | ||
| Impedance | 75 ohms | ||
| Horizontal frequency | 15 kHz to 150 kHz | ||
| Vertical frequency | 30 Hz to 150 Hz | ||
| Return loss | <-36 dB @ 5 MHz | ||
| DC offset (max. allowable) | 1.0 V | ||
| Video output — VGA (SMX 84/88/1616 VGA) | |||
| Number/signal type | 4, 8, or 16 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video | ||
| Connectors | 4, 8, or 16 female 15-pin HD | ||
| Nominal level | 0.7 Vp-p for RGB | ||
| Minimum/maximum levels | 0.3 V to 1.5 Vp-p (follows input) | ||
| Impedance | 75 ohms | ||
| Return loss | <-36 dB @ 5 MHz | ||
| DC offset | ±6 mV with input at 0 offset | ||
| Switching type | Triple-Action | ||
| Sync — VGA (SMX 84/88/1616 VGA) | |||
| Input type | RGBHV, RGBS, RGsB, RsGsBs | ||
| Output type | RGBHV, RGBS, RGsB, RsGsBs (follows input) | ||
| Input level | 0.5 V to 5.0 Vp-p, 4.0 Vp-p normal | ||
| Output level | AGC to TTL: 4.0 V to 5.0 V p-p, unterminated | ||
| Input impedance | 510 ohms | ||
| Output impedance | 75 ohms | ||
| Horizontal frequency | 15 kHz to 150 kHz | ||
| Vertical frequency | 30 Hz to 150 Hz | ||
| Max. propagation delay | 40 ns | ||
| Max. rise/fall time | 18 ns | ||
| Polarity | Positive or negative (follows input) | ||
| Digital video — SMX 44/84/88/1616 SDI | |||
| Routing | |||
| SMX 44 HD SDI | 4 x 4 matrix | ||
| SMX 84 HD SDI | 8 x 4 matrix | ||
| SMX 88 3G-SDI | 8 x 8 matrix | ||
| SMX 1616 3G-SDI | 16 x 16 matrix | ||
| Gain | Unity | ||
| Maximum data rate | 2.97 Gbps | ||
| Data types | 8 or 10 bit | ||
| Operation standards | |||
| 4x4, 8x4 | SMPTE 292M, SMPTE 259M, ITU-RBT.601, ITU-RBT.1120 | ||
| 8x8, 16x16 | SMPTE 292M, SMPTE 259M, SMPTE 424M, ITU-RBT.601, ITU-RBT.1120 | ||
| Digital video input — SMX 44/84/88/1616 SDI | |||
| Number/signal type | 4, 8, or 16 single-link SDI, HD-SDI, 3G-SDI; or dual-link HD-SDI | ||
| Connectors | 4, 8, or 16 female BNC | ||
| Nominal level | 0.80 Vp-p ± 10% | ||
| Impedance | 75 ohms | ||
| Return loss | <-15 dB @ 1 MHz to 1.5 GHz <-10 dB @ 1.5 GHz to 3.0 GHz |
||
| Equalization | Automatic | ||
| Input cable equalization distance | |||
| HD-SDI, 3G-SDI | |||
| Extron SHR, Belden 1694A cable | 500' (152 m) | ||
| Extron HR, Belden 1505A cable | 400' (122 m) | ||
| SDI | |||
| Extron SHR, Belden 1694A cable | 750' (229 m) | ||
| Extron HR, Belden 1505A cable | 550' (168 m) | ||
|
|||
| Digital video output — SMX 44/84/88/1616 SDI | |||
| Number/signal type | 4, 8, or 16 single-link SDI, HD-SDI, 3G-SDI; or dual-link HD-SDI | ||
| Connectors | 4, 8, or 16 female BNC | ||
| Nominal level | 0.80 Vp-p ± 10% | ||
| Impedance | 75 ohms | ||
| Return loss | <-15 dB @ 1 MHz to 1.5 GHz <-10 dB @ 1.5 GHz to 3.0 GHz |
||
| DC offset | ±0.5 V with input at 0 offset | ||
| Re-clocking | Automatic, or use available bypass mode for nonstandard rates | ||
| Jitter | <0.2 VI | ||
| Rise/fall time (20-80%) | |||
| SDI | 700 ps ±100 ps | ||
| HD-SDI | 250 ps ±100 ps | ||
| 3G-SDI | 110 ps ± 30 ps | ||
| Video — SMX 44/48/84/88 DVI | |||
|
|||
| Routing | |||
| SMX 44 DVI | 4 x 4 matrix | ||
| SMX 48 DVI | 4 x 8 matrix | ||
| SMX 84 DVI | 8 x 4 matrix | ||
| SMX 88 DVI | 8 x 8 matrix | ||
| Gain | Unity | ||
| Maximum data rate | 4.95 Gbps (1.65 Gbps per color) | ||
| Maximum pixel clock | 165 MHz | ||
| Resolution range | Up to 1920x1200 @ 48, 50,or 60 Hz; or 1080p @ 60 Hz | ||
| Signal type | Single-link DVI digital video signals are supported. | ||
| Digital video | RGB digital video (DVI standards), actively buffered(supports all single link DVIstandards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video) | ||
|
|||
|
|||
| Digital audio | Embedded audio from HDMI sources can be passed, as long as it is not HDCP encrypted content | ||
| Consumer Electronics Control (CEC) | Not supported | ||
| EDID and DDC | Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered. | ||
| HDCP | Not supported | ||
| HPD | Supports hot plug detection (HPD) of display as a pass-through signal. | ||
| Standards | DVI 1.0, HDMI 1.2 | ||
| Switching speed | 200 ns, max. | ||
| Video input — SMX 44/48/84/88 DVI | |||
| Number/signal type | 4 or 8 (depending on model) digital RGB single-link DVI-D (or HDMI*) | ||
| Connectors | 4 or 8 female DVI-I | ||
| Equalization | Automatic | ||
| Input cable length | >100' (30 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p; 8 bit color | ||
|
|||
| Video output — SMX 44/48/84/88 DVI | |||
| Number/signal type | 4 or 8 (depending on model) digital RGB single-link DVI-D (or HDMI*) | ||
| Connectors | 4 or 8 female DVI-I | ||
| Re-clocking | Automatic | ||
| Peripheral device power | 250 mA per output | ||
| Video — SMX 44/48/84/88 DVI PRO | |||
|
|||
| Routing | |||
| SMX 44 DVI PRO | 4 x 4 matrix | ||
| SMX 48 DVI PRO | 4 x 8 matrix | ||
| SMX 84 DVI PRO | 8 x 4 matrix | ||
| SMX 88 DVI PRO | 8 x 8 matrix | ||
| Gain | Unity | ||
| Resolution range | Up to 1080p (HDTV) or 1920x1200 (the highest resolution of the single link DVI standard) @ 60 Hz | ||
| Signal type | Single-link DVI digital video signals are supported. | ||
| Digital video | RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single link DVI and HDMI (if using an optional adapter) standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video) | ||
|
|||
| Digital audio | Supports HDMI audio (if using an HDMI to DVI adapter) transmitted through the RGB and Y, Cr, Cb lines, actively buffered. | ||
| Consumer Electronics Control (CEC) | Not supported | ||
| EDID and DDC | Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered. | ||
| HDCP | Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI 1.3 standards | ||
| HPD | Supports hot plug detection (HPD) of display as a pass-through signal. | ||
| Maximum data rate | 6.75 Gbps (2.25 Gbps per color) | ||
| Maximum pixel clock | 165 MHz | ||
| Standards | DVI 1.0, HDMI 1.3 | ||
| Switching speed | 200 ns, max. | ||
| Video input — SMX 44/48/84/88 DVI PRO | |||
| Number/signal type | 4 or 8 (depending on model) digital RGB single link DVI-D (or HDMI*) | ||
| Connectors | 4 or 8 female DVI-I (digital only) | ||
| Equalization | Automatic | ||
| Input cable length | >100' (30 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p; 8 bit color | ||
|
|||
| Video output — SMX 44/48/84/88 DVI PRO | |||
| Number/signal type | 4 or 8 (depending on model) digital RGB single link DVI-D (or HDMI*) | ||
| Connectors | 4 or 8 female DVI-I (digital only) | ||
| Re-clocking | Automatic | ||
| Peripheral device power | 250 mA per output | ||
| Video — SMX 44/48/84/88 HDMI | |||
|
|||
| Routing | |||
| SMX 44 HDMI | 4 x 4 matrix | ||
| SMX 48 HDMI | 4 x 8 matrix | ||
| SMX 84 HDMI | 8 x 4 matrix | ||
| SMX 88 HDMI | 8 x 8 matrix | ||
| Gain | Unity | ||
| Resolution range | Up to1920x1200 or 1080p @ 60 Hz | ||
| Signal type | Single-link HDMI (or DVI-D*) | ||
| Digital video | RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single-link DVI (if using an optional adapter) and HDMI standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video) | ||
|
|||
| Digital audio | Supports HDMI audiotransmitted through the RGB and Y, Cr, Cb lines, actively buffered. | ||
| Consumer Electronics Control (CEC) | Not supported | ||
| EDID and DDC | Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered. | ||
| HDCP | Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI 1.3standards | ||
| HPD | Supports hot plug detection (HPD) of display as a pass-through signal. | ||
| Maximum data rate | 6.75 Gbps (2.25 Gbps per color) | ||
| Maximum pixel clock | 165 MHz | ||
| Standards | DVI 1.0, HDMI 1.3 | ||
| Switching speed | 200 ns, max. | ||
| Video input — SMX 44/48/84/88 HDMI | |||
| Number/signal type | 4 or 8 (depending on model) digital RGB single-link HDMI (or DVI-D*) | ||
| Connectors | 4 or 8 female HDMI type A | ||
| Equalization | Automatic | ||
| Input cable length | >100' (30 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p; 8 bit color | ||
|
|||
| Video output — SMX 44/48/84/88 HDMI | |||
| Number/signal type | 4 or 8 (depending on model) digital RGB single-link HDMI (or DVI-D*) | ||
| Connectors | 4 or 8 female HDMI type A | ||
| Re-clocking | Automatic | ||
| Peripheral device power | 250 mA per output | ||
| Optical specifications — SMX 88/1616 FOX Fiber Optic I/O board | |||
|
|||
| Number/type | 8 or 16 singlemode, or 8 or 16 multimode fiber optic inputs and outputs per I/O board | ||
|
|||
| Connectors | 16 or 32 LC connectors per I/O board | ||
| Operating distance | |||
| Singlemode | 30 km (18.75 miles) with singlemode (SM) cables with an Extron singlemode distribution amplifier or Tx/Rx unit | ||
| Multimode | 300 m (985') with 62.5 µm multimode (MM) cables with an Extron multimode distribution amplifier or Tx/Rx unit 1 km (3280') with 50 µm multimode (MM) cables with an Extron multimode distribution amplifier or Tx/Rx unit 2 km (6561') with 50 µm 2000 MHz bandwidth laser multimode cable with an Extron multimode distribution amplifier or Tx/Rx unit |
||
|
|||
| Nominal peak wavelength | 850 nm for multimode (MM), 1310 nm for singlemode (SM) | ||
| Transmission power | |||
| Singlemode | -5 dBm, typical | ||
| Multimode | -5 dBm, typical | ||
| Optical loss budget | |||
| Singlemode | 12 dB, maximum | ||
| Multimode | 7 dB, maximum | ||
| Maximum channel data rate | 4.25 Gbps | ||
| Video — SMX 88/1616 FOX | |||
| Routing | 8 x 8 or 16 x 16 unidirectional (Tx) matrix or 4 x 4 or 8 x 8 bidirectional (Tx/Rx) matrix |
||
| Gain | Unity | ||
| Pixel data bit depth | 8 bits per channel, 3 channels (R, G, B) | ||
| Video/audio input — SMX 88/1616 FOX | |||
| Number/signal type | 8 or 16 fiber optic signals | ||
| Connectors | 8 or 16 LC connectors per I/O board | ||
|
|||
| Video/audio output — SMX 88/1616 FOX | |||
| Number/signal type | 8 or 16fiber optic signals | ||
| Connectors | 8 or 16LC connectors per I/O board | ||
|
|||
| USB — SMX 44/84 USB | |||
| USB specification | USB 2.0 compatible | ||
| USB data rates | Low speed (1.5 Mbps), full speed (12 Mbps), high speed (480 Mbps) | ||
| USB input — SMX 44/84 USB | |||
| Connectors | 4 or 8 female USB type B | ||
| USB output — SMX 44/84 USB | |||
| Connectors | 8 female USB type A | ||
| Audio — SMX 84/88/1616A (analog) | |||
| Routing | |||
| SMX 84 A | 8 x 4 stereo matrix | ||
| SMX 88 A | 8 x 8 stereo matrix | ||
| SMX 1616 A | 16 x 16 stereo matrix | ||
| Gain | Unbalanced output: -6 dB; balanced output 0 dB | ||
| Frequency response | 20 Hz to 20 kHz, ±0.05 dB | ||
| THD + Noise | 0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level | ||
| S/N | >102 dB at maximum output (21 dBu, unweighted) (balanced) | ||
| Crosstalk | <-95 dB @ 1 kHz, fully loaded | ||
| Stereo channel separation | >98 dB @ 1 kHz | ||
| CMRR | >70 dB @ 20 Hz to 20 kHz | ||
| Audio input — SMX 84/88/1616 A (analog) | |||
| Number/signal type | 8 or 16 stereo, balanced/unbalanced | ||
| Connectors | (8 or 16) 3.5 mm captive screw connector, 5 pole | ||
| Impedance | >10k ohms unbalanced/balanced, DC coupled | ||
| Nominal level | 0 dBu (0.775 Vrms) | ||
| Maximum level | +19.5 dBu, (balanced or unbalanced) at 1% THD+N | ||
| Input gain adjustment | –18 dB to +24 dB, adjustable per input; default = 0 dB | ||
|
|||
| Audio output — SMX 84/88/1616 A (analog) | |||
| Number/signal type | 4, 8, or 16 stereo, balanced/unbalanced | ||
| Connectors | (8 or 16) 3.5 mm captive screw connector, 5 pole | ||
| Impedance | 50 ohms unbalanced, 100 ohms balanced | ||
| Gain error | ±0.1 dB channel to channel | ||
| Maximum level (Hi-Z) | >+21 dBu, balanced or unbalanced at 0.1% THD+N | ||
| Maximum level (600 ohm) | >+15 dBm, balanced or unbalanced at 0.1% THD+N | ||
| Volume control range | -76 dB to 0 dB (volume numbers 0 through 64) in a 35 dB increment from step 0 to step 1, then in 1 dB increments from steps 1 to 64; default = 64 (0dB) | ||
|
|||
| Control/remote — switcher host ports | |||
| Serial host control port | 1 bidirectional RS-232 or RS-422, rear panel female 9-pin D connector 1 bidirectional RS-232 front panel 2.5 mm mini stereo jack |
||
| Baud rate and protocol | 9600 (default), 19200, 38400, 115200 baud (rear port only), adjustable; 8 data bits, 1 stop bit, no parity | ||
| Serial control pin configurations | |||
| 9-pin female D connector | |||
| RS-232 | 2 = Tx, 3 = Rx, 5 = Gnd | ||
| RS-422 | 2 = Tx-, 3 = Rx-, 5 = Gnd, 7 = Rx+, 8 = Tx+ | ||
| Mini stereo jack | |||
| RS-232 | Tip = Tx, ring = Rx, sleeve = Gnd | ||
| Ethernet control port | 1 female RJ-45 | ||
| Ethernet data rate (for network communication) | 10/100Base-T, half/full duplex with autodetect | ||
| Ethernet protocol | ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP, Telnet | ||
| Ethernet default settings | Link speed and duplex level = autodetected IP address = 192.168.254.254 Subnet mask = 255.255.0.0 Default gateway = 0.0.0.0 DHCP = off |
||
| Web server | Up to 200 simultaneous sessions 7.0 MB nonvolatile user memory |
||
| Program control | Extron control/configuration program for Windows ® Extron Simple Instruction Set ™ (SIS ™ ) Microsoft ® Internet Explorer ® ver. 6 or higher, Telnet |
||
| General | |||
| Power supply | Internal, with or without redundant power supply Input: 100-240 VAC, 50-60 Hz |
||
| Power consumption | 15.0 to 180 watts, depending on configuration | ||
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
| Cooling | Fan, left to right (as viewed from front panel) | ||
| Thermal dissipation, full load | 50 to 620 BTU/hr, depending on configuration | ||
| Mounting | |||
| Rack mount | Yes | ||
| Enclosure type | Metal | ||
| Enclosure dimensions (Depth excludes connectors. Width excludes rack ears.) | |||
| SMX 200 Frame | 3.5" H x 17.0" W x 12.0" D (2U high, full rack wide) (8.9 cm H x 43.1 cm W x 30.5 cm D) |
||
| SMX 300 Frame | 5.25" H x 17.0" W x 12" D (3U high, full rack wide) (13.3 cm H x 43.2 cm W x 30.5 cm D) |
||
| SMX 400 Frame | 7.0" H x 17.0" W x 12" D (4U high, full rack wide) (17.8 cm H x 43.2 cm W x 30.5 cm D) |
||
| SMX 500 Frame | 8.75" H x 17.0" W x 12" D (5U high, full rack wide) (22.2 cm H x 43.2 cm W x 30.5 cm D) |
||
| Product weight with boards installed | |||
| SMX 200 Frame | 16.2 lbs (7.3 kg) | ||
| SMX 300 Frame | 18.1 lbs (8.2 kg) | ||
| SMX 400 Frame | 20.3 lbs (9.2 kg) | ||
| SMX 500 Frame | 23.9 lbs (10.8 kg) | ||
| Shipping weight with boards installed | |||
| SMX 200 Frame | 20 lbs (10 kg) | ||
| SMX 300 Frame | 22 lbs (10 kg) | ||
| SMX 400 Frame | 26 lbs (12 kg) | ||
| SMX 500 Frame | 30 lbs (14 kg) | ||
| Shipping weight of individual boards, if purchased separately | |||
| SMX 88 FOX | 2lbs (1 kg) | ||
| SMX 1616 FOX | 3 lbs (2 kg) | ||
| DIM weight | |||
| SMX 400 Frame | 30lbs (14 kg) | ||
| Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
| Regulatory compliance | |||
| Safety | CE, c-UL, UL | ||
| EMI/EMC | CE, C-tick, FCC Class A, ICES, KCC, VCCI | ||
| Product warranty | 3 years parts and labor | ||
|
|||
|
|||
| (8.1-060115-D29) | |||
中国上海市松江区茸华路 686 号
(联系就说在DAV音视工程网上看到的)
Sales-China@Extron.com
021-3760 1566
爱思创电子（上海）有限公司（爱思创Extron中国）全球总部位于美国加州，是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、分配放大器、音频放大器、扬声器、双绞线和光纤设备、视频图像解析度转换器、视音频信号处理器、视音频流媒体产品、教室声场系统及高分辨率电缆。爱思创Extron电子提供专业视音频工程、培训、设计、演示支持。
DAV首页