Extron MTP transmitters and receivers are part of the family of economical, compact products designed for easy integration into new and existing AV environments. MTPs can be used with any CAT 5, 5e, or 6 twisted pair cable or Extron Enhanced Skew-Free™ AV UTP cable for cable runs of 1,000 feet (300 meters) or more. MTPs are compact so they fit just about anywhere: in racks, under tables and desktops, or next to a projector.
| 相兼容的分配放大器 | ||
|---|---|---|
| MTP DA4 和 MTP DA8 | 4 路和 8 路输出 MTP 双绞线分配放大器 | |
Extron MTP transmitters and receivers are part of the family of economical, compact products designed for easy integration into new and existing AV environments. MTPs can be used with any CAT 5, 5e, or 6 twisted pair cable or Extron Enhanced Skew-Free™ AV UTP cable for cable runs of 1,000 feet (300 meters) or more. MTPs are compact so they fit just about anywhere: in racks, under tables and desktops, or next to a projector.
There are three models of one input composite video MTP - Mini Twisted Pair transmitters in a one-eighth rack enclosure:
The MTP T CV is a composite video only model
The MTP T AV offers composite video with stereo audio on a captive screw connector
The MTP T AV RCA is a composite video model with stereo audio on RCA connectors
All MTP transmitters are powered products and provide active balanced transmissions for both video and audio. There are also front and back LED power indicators for easy troubleshooting.
特性
Transmits AV signals 1,000 feet (300 meters) or more over a single Category 5, 5e, or 6 UTP cable
Compatible with composite video and stereo audio
Output on a single female RJ-45 connector
LED power indicators on front and rear
Remote power capability up to 500 feet (150 meters)
Rack-mountable, 1U, one-eighth rack width metal enclosure
Versatile mounting options including rack, under-desk, or projector mounts
Energy-efficient external universal power supply included, part #70-055-01 — Provides worldwide compatibility, low power consumption, and reduced operating costs.
注: Part number 60-540-41 is an upgraded replacement for part number 60-540-01
Part numbers 60-540-51 and 60-540-61 are upgraded replacements for part numbers 60-540-21 and 60-540-31
示意图
面板图
| MTP AV Series | |||
| Video | |||
|---|---|---|---|
| Gain | Unity | ||
| Differential phase error | <1.0° at 3.58 MHz and 4.43 MHz | ||
| Differential gain error | <1.0% at 3.58 MHz and 4.43 MHz | ||
| Video input | |||
| Number/signal type | |||
| MTP T CV/AV Series | 1 composite video | ||
| MTP T SV Series | 1 S-video | ||
| MTP R CV/AV/SV Series | 1 set of proprietary analog signals | ||
| Connectors | |||
| MTP T CV/AV Series | 1 female BNC | ||
| MTP T AV AAP | 1 female RCA | ||
| MTP T SV Series | 1 female 4-pin mini DIN | ||
| MTP R CV/AV/SV Series | 1 female RJ-45 | ||
| Nominal level | 1 Vp-p for Y of S-video and for composite video 0.3 Vp-p for C of S-video |
||
| Minimum/maximum levels | 0.3 V to 1.5 Vp-p with no offset | ||
| Impedance | 75 ohms | ||
| Return loss | <-30 dB, DC @ 10 MHz | ||
| DC offset (max. allowable) | 100 mV | ||
| Video output | |||
| Number/signal type | |||
| MTP T CV/AV/SV Series, MTP T AAP Series | 1 set of proprietary analog signals | ||
| MTP R CV/AV Series | 1 composite video | ||
| MTP R SV Series | 1 S-video | ||
| Connectors | |||
| MTP T CV/AV/SV Series | 1 female RJ-45 | ||
| MTP T AAP Series | 1 female RJ-45 on a 3" (7.6 cm) pigtail | ||
| MTP R CV/AV Series | 1 female BNC | ||
| MTP R SV Series | 1 female 4-pin mini DIN | ||
| Nominal level | 1 V p-p for Y of S-video and for composite video 0.3 V p-p for C of S-video |
||
| Minimum/maximum levels | 0.3 V to 1.5 Vp-p | ||
| Impedance | 75 ohms | ||
| Return loss | <-35 dB @ 5 MHz | ||
| DC offset | ±20mV with input at 0 offset | ||
| Sync | |||
| Standards | NTSC 3.58, NTSC 4.43, PAL, SECAM | ||
| Audio — audio models (A, AV, SVA models) only | |||
| Gain | |||
| RCA models | Unbalanced output: 0 dB (unity) | ||
| All other models | Unbalanced output: 0 dB (unity); balanced output: +6 dB | ||
| Frequency response | 20 Hz to 20 kHz, ±0.25 dB | ||
| THD + Noise | 0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level | ||
| S/N | |||
| RCA models | >90 dB, at maximum output (unweighted) | ||
| All other models w/audio | >90 dB, balanced at maximum output (unweighted) | ||
| Crosstalk | <-80 dB @ 1 kHz, fully loaded | ||
| Stereo channel separation | >75 dB @ 1 kHz | ||
| CMRR | >34 dB @ 20 Hz to 20 kHz | ||
| Audio input — audio models (A, AV, SVA models) only | |||
| Number/signal type | |||
| MTP T AV, MTP T SV A | 1 stereo, balanced/unbalanced | ||
| MTP T AV/SV A RCA, MTP T AAP, MTP T 45 Series | 1 stereo, unbalanced | ||
| MTP R Series | 1 set of proprietary analog signals | ||
| Connectors | |||
| MTP T AV, MTP T SV A | (1) 3.5 mm captive screw connector, 5 pole | ||
| MTP T AV/SV A RCA, MTP T AAP | 1 pair of female RCA | ||
| MTP R Series | 1 female RJ-45 (shielded) | ||
| Impedance | >5.6k ohms±5% unbalanced, >10k ohms ±5% balanced | ||
| Nominal level | -10 dBV (0.32 Vrms) | ||
| Maximum level | >+2.4 dBu (balanced or unbalanced) at 1%THD+N | ||
|
|||
| Audio output — audio models (A, AV, SVA models) only | |||
| Number/signal type | |||
| MTP T Series | 1 set of proprietary analog signals(all MTP T models) | ||
| MTP R AV, MTP R SV A | 1 stereo or dual mono, balanced/unbalanced | ||
| MTP R AV/SV A RCA | 1 stereo or dual mono, unbalanced | ||
| Connectors | |||
| MTP T Series | 1 female RJ-45 (shielded) | ||
| MTP T AAP Series | 1 female RJ-45 on a 3" (7.6 cm) pigtail | ||
| MTP R AV, MTP R SV A | (1) 3.5 mm captive screw connector, 5 pole | ||
| MTP R AV/SV A RCA | 1 pair of female RCA | ||
| Impedance | |||
| MTP R AV, MTP R SV A | 50 ohms unbalanced, 100 ohms balanced | ||
| MTP R AV/SV A RCA | 50 ohms unbalanced | ||
| Gain error | ±0.1 dB channel to channel | ||
| Maximum level (Hi-Z) | >+3.3 dBu, balanced or unbalanced at 1%THD+N | ||
| Maximum level (600 ohm) | >+2.0 dBm, balanced or unbalanced at 1%THD+N | ||
| General | |||
| Recommended cable type | CAT5/5e/6 (shielded or unshielded) | ||
| External power supply | 100 VAC to 240 VAC, 50-Hz, external; to 12 VDC, 1.0 A, regulated | ||
| Power input requirements | 12 VDC, 0.2 A | ||
|
|||
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
| Cooling | Convection, no vents | ||
| Mounting | |||
| Rack mount | |||
| MTP T AAP Series | Yes, with optional rack panel | ||
| All other models | Yes, with optional 1U rack shelf | ||
| Furniture or wall mount | |||
| MTP T AAP Series | Yes, with optional AAP mounting plates | ||
| All other models | Yes, with optional brackets. | ||
| Enclosure type | Metal | ||
| Enclosure dimensions (Depths exclude connectors and cables.) | |||
| MTP T AAP Series | |||
| Faceplate | 1.4" H x 3.5" W x 0.1" D (3.6 cm H x 8.9 cm W x 0.3 cm D) (double space AAP plate) | ||
| Transmitter | 1.35" H x 2.7" W x 1.3" D (3.4 cm H x 6.9 cm W x 3.3 cm D) | ||
| All other models | 1.7" H x 2.2" W x 3.0" D (1U high, one-eighth rack wide) (4.2 cm H x 5.6 cm W x 7.6 cm D) |
||
| Product weight | 1.0 lbs (0.5 kg) | ||
| Shipping weight | 3 lbs (2 kg) | ||
| Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
| Regulatory compliance | |||
| Safety | CE, c-UL, UL | ||
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI | ||
| MTBF | 30,000 hours | ||
| Warranty | 3 years parts and labor | ||
|
|||
|
|||
| (7.6-113009-D21) | |||
中国上海市松江区茸华路 686 号
(联系就说在DAV音视工程网上看到的)
Sales-China@Extron.com
021-3760 1566
爱思创电子（上海）有限公司（爱思创Extron中国）全球总部位于美国加州，是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、分配放大器、音频放大器、扬声器、双绞线和光纤设备、视频图像解析度转换器、视音频信号处理器、视音频流媒体产品、教室声场系统及高分辨率电缆。爱思创Extron电子提供专业视音频工程、培训、设计、演示支持。
DAV首页