Extron MTP 15HD A 系列是多用途双绞线发送器和接收器系列，用于通过单根双绞线电缆长距离传输高分辨率计算机视频和音频信号。所有型号均兼容高达 1920x1200 WUXGA 的分辨率，支持的 XGA 信号电缆传输距离可达 600'（185 m）或更远，UXGA 信号可达 450'（135 m）或更远。
| 相兼容的分配放大器 | ||
|---|---|---|
| MTP DA4 和 MTP DA8 | 4 路和 8 路输出 MTP 双绞线分配放大器 | |
| 可选附件 | ||
|---|---|---|
| RSU 129 | 用于 9.5" 深产品的通用型机架搁板套件 | |
| RSF 123 | 用于 3.5" 深产品的机架搁板套件 | |
| MBU 123 | 用于 1/8、1/4 和 1/2 机架宽产品的薄型安装套件 | |
| MR 系列 | 模块化底圈 | |
| Skew-Free UTP | 用于 Extron VT、MTP 和 TP 系列模拟双绞线产品的增强型 Skew-Free™ 等长视音频 UTP 电缆 | |
| 安装故事 |
|---|
| Dial Corporation Uses Extron Equipment to Provide Any Signal Anywhere Building a new corporate headquarters for a Fortune Global 500 company is no small task. And when that new facility encompasses nearly 350,000 square feet over four floors, an AV system that seamlessly ties together dozens of conference rooms, boardrooms, and other meeting spaces becomes critical to day to day operations and efficient, effective communication... |
Extron MTP 15HD A 系列是多用途双绞线发送器和接收器系列，用于通过单根双绞线电缆长距离传输高分辨率计算机视频和音频信号。所有型号均兼容高达 1920x1200 WUXGA 的分辨率，支持的 XGA 信号电缆传输距离可达 600'（185 m）或更远，UXGA 信号可达 450'（135 m）或更远。
延长距离接收器
对于需要将信号传输至更远距离的视音频系统，MTP 1500RL 15HD A 和 MTP 1500RL 15HD A SEQ 两种型号的接收器可以通过单根 CAT 5 类电缆接收传输距离达 1500'（450 m）或更远的高分辨率视频和音频信号。
特性
通过单根 CAT 5 类电缆传输高分辨率视频和单声道音频信号
传输距离为 600' (185 m)和 1500' (450 )的不同接收器型号
兼容分辨率高达 1920x1200 的高分辨率视频信号
适用于不同安装环境的多种产品规格
支持 RGBHV、RGBS、RGsB、RsGsBs、分量视频、S-视频和复合视频
与 HDTV 分量视频兼容，双电平或三电平同步
前面板上的 LED 电源指示器
随附外置式通用电源，产品编号为 70-775-01
输入：带缓冲环通的 RJ-45 插座
输出：15 针 HD 插座用于视频，螺丝锁定器用于平衡/非平衡单声道音频
独立可变电平和峰值控制
缓冲 MTP 输出，用于对多达 8 个接收器进行菊花链式连接
可对每种色彩进行独立的扭曲延时补偿调整
可机架安装的 1U 高、1/4 机架宽的磨砂金属外壳
示意图
面板图
| MTP 15HD A Series | |||
| Video | |||
|---|---|---|---|
| Gain | Unity | ||
| Number/signal type | 1 set of proprietary analog signals | ||
| Connectors | |||
| MTP R 15HD RSA D | 1 female RJ-45 on a pigtail | ||
| All other models | 1 female RJ-45 | ||
| Video input and loop through — transmitters | |||
| Number/signal type | |||
| MTP T 15HD A | 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video 1 buffered RGBHV, RGBS, RGsB, RsGsBs local monitor loop through (includes ID bits) |
||
| MTP T 15HD A AAP, MTP T 15HD A D, MTP T 15HD A WM | 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video | ||
| Connectors | |||
| MTP T 15HD A | 2 female 15-pin HD | ||
| All other transmitters | 1 female 15-pin HD | ||
| Nominal level | 1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video |
||
| Minimum/maximum levels | 0.3 V to 1.45 Vp-p | ||
| Impedance | 75 ohms | ||
| Horizontal frequency | 15 kHz to 130 kHz | ||
| Vertical frequency | 30 Hz to 150 Hz | ||
| Return loss | <-30 dB @ 5 MHz | ||
| DC offset (max. allowable) | 250 mV | ||
| Video output — receivers (MTP RL 15HD A, MTP RL 15HD A SEQ, MTP R 15HD RSA D) | |||
| Number/signal type | |||
| MTP R 15HD RSA D | 1 analog VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs, HD component video, component video, S-video, or composite video | ||
| All other receivers | 1 set of proprietary analog signals 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video |
||
| Connectors | |||
| MTP R 15HD RSA D | 1 female 15-pin HD | ||
| All other receivers | 1 female RJ-45 1 female 15-pin HD |
||
| Nominal level | 1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video |
||
| Minimum/maximum levels | 0.3 V to 1.45 Vp-p | ||
| Impedance | 75 ohms | ||
| Return loss | <-30 dB @ 5 MHz | ||
| DC offset | |||
| MTP R 15HD RSA D | <±20 mV with input at 0 offset | ||
| All other receivers | <±35 mV with input at 0 offset | ||
| Skew compensation | 62 ns | ||
| Maximum resolution | Up to 1920x1200 or 2048x1080 or 1080p at 300' Up to 1024x768 at 600' |
||
|
|||
| Sync | |||
| Input type (transmitters) | RGBHV, RGBS, RGsB, RsGsBs | ||
| Output type (receivers) | RGBHV, RGBS, RGsB, RsGsBs | ||
| Standards | NTSC 3.58, NTSC 4.43, PAL, SECAM | ||
| Input level (transmitter) | 3.5 V to 5.5 Vp-p, unterminated | ||
| Output level (receivers) | 4.0 V to 5.0 Vp-p, unterminated | ||
| Input impedance (transmitter) | 573 ohms ±5% | ||
| Output impedance (receivers) | 110 ohms | ||
| Max. input voltage (transmitter) | 5.5 V p-p | ||
| Polarity | |||
| Transmitter | Positive or negative (follows input polarity) | ||
| Receivers | Positive or negative (switch-selectable) | ||
| Audio — all models | |||
| Number/signal type | 1 set of proprietary analog signals | ||
| Connectors | 1 female RJ-45 | ||
| Gain | Unbalanced output: 0 dB; balanced output: +6 dB | ||
| Frequency response | 20 Hz to 20 kHz, ±1 dB | ||
| THD + Noise | 0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level | ||
| S/N | >70 dB at maximum output (unweighted) | ||
| Stereo channel separation | >60 dB @ 1 kHz | ||
| CMRR | >43 dB @ 20 Hz to 20 kHz | ||
| Audio input — transmitters | |||
| Number/signal type | 1 stereo, unbalanced | ||
| Connectors | (1) 3.5 mm mini stereo jack | ||
| Impedance | >10k ohms, unbalanced | ||
| Nominal level | +4 dBu (1.23 Vrms), -10 dBV (316 mVrms) | ||
| Maximum level | +18 dBu, (unbalanced) at 1%THD+N | ||
|
|||
| Audio output — MTP T 15HD A AAP, MTP T 15HD A D, MTP T 15HD A WM local stereo output | |||
| Number/signal type | 1 stereo, balanced/unbalanced | ||
| Connectors | (1) 3.5 mm direct insertion captive screw connector, 5 pole | ||
| Impedance | 50 ohms unbalanced, 100 ohms balanced | ||
| Gain error | ±1 dB channel to channel | ||
| Maximum level (Hi-Z) | >+23 dBu, balanced or unbalanced at 1% THD+N | ||
| Maximum level (600 ohm) | >+17 dBm, balanced or unbalanced at 1% THD+N | ||
| Audio output — receivers | |||
| Number/signal type | |||
| MTP R 15HD RSA D | 1 mono, balanced/unbalanced | ||
| All other receivers | 2 mono, balanced/unbalanced | ||
| Connectors | |||
| MTP R 15HD RSA D | (1) 3.5 mm captive screw connector, 5 pole (uses 3 poles) | ||
| All other receivers | (1) 3.5 mm captive screw connector, 5 pole | ||
| Impedance | 50 ohms unbalanced, 100 ohms balanced | ||
| Gain error | ±1 dB channel to channel | ||
| Nominal level | +4 dBu (1.23 Vrms), -10 dBV (316 mVrms) | ||
| Maximum level | |||
| MTP R 15HD RSA D | 14 dBm, unbalanced at 1% THD+N | ||
| All other receivers | +18 dBu, unbalanced at 1% THD+N | ||
| Control/remote — external device (pass-through, unidirectional or bidirectional) — MTP R 15HD RSA D only | |||
| Serial control port input/output | 1 set of proprietary signals on a female RJ-45 jack | ||
| Serial control port output/input | RS-232 via 3 poles of a 3.5 mm captive screw connector, 5 pole | ||
| Baud rates | Up to 38400 bps at up to 1000' (304.8 m) (Higher data rates and distances are possible. Performance varies based on baud rate and cable length.) | ||
| Protocol | Data bits = 5 - 8 Stop bits = 1 or 2 Parity = odd, even, none Flow control = XON, XOFF, none |
||
|
|||
| Serial control pin configuration | Captive screw connector: 1 = Tx, 2 = Rx, 3 = GND | ||
| General | |||
| Recommended cable type | CAT 5/5e/6 (shielded or unshielded) | ||
| Power supply | External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1.5 A, 18 watts |
||
| Power input requirements | 12 VDC, 0.5 A | ||
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
| Cooling | Convection, no vents | ||
| Mounting | |||
| Rack mount | |||
| MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ | Yes, with optional rack shelf | ||
| Furniture or wall mount | |||
| MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ | Yes, with optional under-desk mounting kit | ||
| MTP T 15HD A AAP | Yes, with optional AAP mounting faceplates that have double space high AAP opening | ||
| MTP T 15HD A D, MTP R 15HD RSA D | Yes, in a decorator-style opening with a standard electrical wall box orstandard 1-gang USsize mud ring | ||
| MTP T 15HD A WM | Yes, in a 1-gang opening | ||
| Pole mount | |||
| MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ | Yes, with optional pole mounting kit | ||
| Enclosure type | Metal | ||
| Enclosure dimensions | |||
| MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ | 1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide) 4.3 cm H x 10.9 cm W x 7.6 cm D (Depth excludes connectors.) |
||
| Faceplates | |||
| MTP T 15HD A AAP | 1.4" H x 3.5" W x 0.1" D (3.6 cm H x 8.9 cm W x 0.3 cm D) (double space high AAP plate) |
||
| MTP T 15HD A D, MTP R 15HD RSA D | 2.6" H* x 1.3" W x 0.1" D (6.6 cm H* x 3.3 cm W x 0.3 cm D) (Fits the opening in a 1 gang, 4.4" H x 2.7" W decorator-style wallplate. Depth excludes connectors.) *Overall height is 4.1" (10.4 cm) including mounting tabs. |
||
| MTP T 15HD A WM | 4.5" H x 2.8" W x 0.1" D (11.4 cm H x 7.1 cm W x 0.3 cm D) (1 gang) | ||
| Device | |||
| MTP R 15HD RSA D | 2.75" H x 1.65" W x 1.3" D (7.0 cm H x 4.2 cm W x 3.3 cm D) (Depth excludes connectors.) |
||
| Other AAP, D, and WM models | 2.7" H x 1.4" W x 1.4" D (6.9 cm H x 3.6 cm W x 3.6 cm D) (Depth excludes connectors.) |
||
| Product weight | 0.4 lbs (0.2 kg) | ||
| Regulatory compliance | CE, C-tick, c-UL, UL, FCC Class A, ICES, VCCI | ||
| Product warranty | 3 years parts and labor | ||
| Everlast power supply warranty | 7 years parts and labor | ||
|
|||
|
|||
| (4327-D18) | |||
| 可选附件 | ||
|---|---|---|
| RSU 129 | 用于 9.5" 深产品的通用型机架搁板套件 | |
| RSF 123 | 用于 3.5" 深产品的机架搁板套件 | |
| MBU 123 | 用于 1/8、1/4 和 1/2 机架宽产品的薄型安装套件 | |
| MR 系列 | 模块化底圈 | |
| Skew-Free UTP | 用于 Extron VT、MTP 和 TP 系列模拟双绞线产品的增强型 Skew-Free™ 等长视音频 UTP 电缆 | |
中国上海市松江区茸华路 686 号
(联系就说在DAV音视工程网上看到的)
Sales-China@Extron.com
021-3760 1566
爱思创电子（上海）有限公司（爱思创Extron中国）全球总部位于美国加州，是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、分配放大器、音频放大器、扬声器、双绞线和光纤设备、视频图像解析度转换器、视音频信号处理器、视音频流媒体产品、教室声场系统及高分辨率电缆。爱思创Extron电子提供专业视音频工程、培训、设计、演示支持。
DAV首页