Extron MTP C7 15HD RS 是系列是多用途微型双绞线发送器和接收器系列,可以通过单根 CAT 7 双绞线电缆将 VGA 和 RS-232 串行控制信号长距离发送到演示系统中的显示设备。它们兼容高达 1920x1200 WUXGA 的分辨率,支持的 XGA 信号电缆传输距离可达 600'(185 m)或更远,UXGA 信号可达 450'(135 m)或更远。MTP C7 15HD RS 系列特别适用于需要将高分辨率视频信号长距离发送到显示设备而管道空间有限的系统,或者布线可能暴露在外的系统。理想的应用环境包括机场、博物馆、电影院和宾馆的公共信息显示。
可选附件 | ||
---|---|---|
Skew-Free UTP | 用于 Extron VT、MTP 和 TP 系列模拟双绞线产品的增强型 Skew-Free™ 等长视音频 UTP 电缆 | |
PS 124 | 多路输出 12 V 直流电源 | |
RSB 129 | Basic Rack Shelf for 9.5" Deep Products |
Extron MTP C7 15HD RS 是系列是多用途微型双绞线发送器和接收器系列,可以通过单根 CAT 7 双绞线电缆将 VGA 和 RS-232 串行控制信号长距离发送到演示系统中的显示设备。它们兼容高达 1920x1200 WUXGA 的分辨率,支持的 XGA 信号电缆传输距离可达 600'(185 m)或更远,UXGA 信号可达 450'(135 m)或更远。MTP C7 15HD RS 系列特别适用于需要将高分辨率视频信号长距离发送到显示设备而管道空间有限的系统,或者布线可能暴露在外的系统。理想的应用环境包括机场、博物馆、电影院和宾馆的公共信息显示。
注:仅支持 Extron DTP26 或 CAT 7 电缆。MTP C7 T 15HD RS 发送器仅与 MTP C7 RL 15HD RS 和 MTP C7 RL 15HD RS SEQ 接收器兼容。
特性
通过单根 CAT 7 电缆在 600'(185 m)或更远距离发送和接收高分辨率视 频和 RS-232 信号
兼容分辨率高达 1920x1200 的视频信号
支持 RGBHV、RGBS、RGsB、RsGsBs、分量视频、S-视频和复合视频
兼容 HDTV 分量视频,双电平或三电平同步
可机架安装的 1U 高、1/4 机架宽的金属外壳
多样化的安装选件
随附外置式通用电源,产品编号为 70-775-01
输入:带缓冲环通的 RJ-45 插座,用于 CAT 7 电缆
输出:15 针 HD 插座用于视频,螺丝锁定器用于 RS-232
独立可变电平和峰值控制
缓冲 MTP CAT 7 输出,用于对多达 8 个接收器进行菊花链式连接
可对每种色彩进行独立的扭曲延时补偿调整
可机架安装的 1U 高、1/4 机架宽的磨砂金属外壳
示意图
面板图
MTP 15HD RS Series | |||
Video | |||
---|---|---|---|
Gain | Unity | ||
Number/signal type | |||
MTP 4T 15HD RS | 4 sets of proprietary analog signals | ||
All other models | 1 set of proprietary analog signals | ||
Connectors | |||
MTP 4T 15HD RS | 4 female RJ-45 | ||
MTP R 15HD RSA D | 1 female RJ-45 on a pigtail | ||
All other models | 1 female RJ-45 | ||
Video input and loop-through — transmitter (MTP T 15HD RS, MTP C7 T 15HD RS, MTP 4T 15HD RS) | |||
Number/signal type | 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video (with bi-level or tri-level sync), S-video, or composite video 1 buffered RGBHV, RGBS, RGsB, RsGsBs local monitor loop through (includes ID bits) |
||
Connectors | 2 female 15-pin HD | ||
Nominal level | 1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video |
||
Minimum/maximum levels | 0.3 V to 1.45 Vp-p | ||
Impedance | 75 ohms | ||
Horizontal frequency | 15 kHz to 130 kHz | ||
Vertical frequency | 30 Hz to 150 Hz | ||
Return loss | <-30 dB @ 5 MHz | ||
DC offset (max. allowable) | 250 mV | ||
Video output — receivers | |||
Number/signal type | |||
MTP R 15HD RSA D | 1 analog VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs, HD component video, component video, S-video, or composite video | ||
All other receivers | 1 set of proprietary analog signals 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video (bi-/tri-level sync), S-video, or composite video |
||
Connectors | |||
MTP R 15HD RSA D | 1 female 15-pin HD | ||
All other receivers | 1 female RJ-45 1 female 15-pin HD |
||
Nominal level | 1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video |
||
Minimum/maximum levels | 0.3 V to 1.45 Vp-p | ||
Impedance | 75 ohms | ||
Return loss | <-30 dB @ 5 MHz | ||
DC offset | <±20 mV with input at 0 offset | ||
Skew compensation | 62 ns | ||
Maximum resolution | |||
MTP 1500RL 15HD RS SEQ | Up to 1600x1200 and 1080p at 1500' Up to 1920x1200 and 2048x1080 at 1200' |
||
All other models | Up to 1920x1200 or 2048x1080 or 1080p at 300' Up to 1024x768 at 600' |
||
|
|||
Sync | |||
Input type (transmitter) | RGBHV, RGBS, RGsB, RsGsBs | ||
Output type (receivers) | RGBHV, RGBS, RGsB, RsGsBs | ||
Standards | NTSC 3.58, NTSC 4.43, PAL, SECAM | ||
Input level (transmitter) | 3.5 V to 5.5 Vp-p, unterminated | ||
Output level (receivers) | |||
MTP 1500RL 15HD RS SEQ | 0.3 Vp-p for component video (bi-level sync) 0.6 Vp-p for component video (tri-level sync) TTL: 4.0 V to 5.0 V p-p, unterminated for RGBHV, RGBS |
||
All other models | 4.0 V to 5.0 Vp-p, unterminated | ||
Input impedance | |||
MTP C7 models | 573 ohms | ||
All other models | 510 ohms | ||
Output impedance | |||
MTP C7 models | 92 ohms ±8% (25 mA) | ||
All other models | 110 ohms | ||
Polarity | |||
Transmitter | Positive or negative (follows input polarity) | ||
Receivers | Positive or negative (switch selectable) | ||
Control/remote — external device (pass-through, unidirectional or bidirectional) | |||
Serial control port input/output | |||
MTP T 15HD RS, MTP C7 T 15HD RS, MTP 4T 15HD RS | RS-232 via (1) 3.5 mm, 3 pole captive screw connector | ||
MTP R 15HD RSA D, MTP C7 RL 15HD RS, MTP C7 RL 15HD RS SEQ | 1 set of proprietary signals on a female RJ-45 jack | ||
Serial control port output/input | |||
MTP T 15HD RS, MTP C7 T 15HD RS, MTP 4T 15HD RS | 1 set of proprietary signals on a female RJ-45 jack | ||
MTP R 15HD RSA D | RS-232 via 3 poles of a 3.5 mm captive screw connector, 5 pole | ||
All other receivers | RS-232 via a 3.5 mm, 3 pole captive screw connector | ||
Baud rates | |||
MTP R 15HD RSA D, MTP 1500RL 15HD RS SEQ | Up to 38400 bps at up to 1000' (304.8 m) | ||
All other models | Up to 38400 bps at up to 600' (183 m) | ||
|
|||
Protocol | Data bits = 5 - 8 Stop bits = 1 or 2 Parity = odd, even, none Flow control = XON, XOFF, none |
||
|
|||
Serial control pin configuration | Captive screw connectors: 1 = Tx, 2 = Rx, 3 = GND | ||
General | |||
Recommended cable type | |||
Models other than C7 models | CAT 5/5e/6 (shielded or unshielded) | ||
Required cable type | |||
MTP C7 15HD models | Extron STP201 or CAT 7 | ||
Power supply | |||
MTP 4T 15HD RS | Internal Input: 100-240 VAC, 50-60 Hz |
||
All other models | External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1 A, 12 watts |
||
Power input requirements | For models except MTP 4T 15HD RS | ||
MTP 1500RL 15HD RS SEQ | 12 VDC, 1.0 A max. | ||
All other models | 12 VDC, 0.5 A | ||
Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
Cooling | |||
MTP 1500RL 15HD RS SEQ | Convection, vents sides to top | ||
All other models | Convection, no vents | ||
Mounting | |||
Rack mount | |||
MTP R 15HD RSA D | No | ||
MTP 4T 15HD RS | Yes, with included mounting kit | ||
All other models | Yes, with optional 1U rack shelf | ||
Furniture mount | |||
MTP R 15HD RSA D | Yes, using a standard electrical wall box or decorator-style size mud ring | ||
MTP 1500RL 15HD RS SEQ | No | ||
All other models except MTP 4T 15HD RS | Yes, with optional mini under-desk mounting kit | ||
Wall mount | |||
MTP 1500RL 15HD RS SEQ | Yes, with optional wall mounting kit | ||
Pole mount | |||
MTP R 15HD RSA D | No | ||
MTP 1500RL 15HD RS SEQ | No | ||
All other models except MTP 4T 15HD RS | Yes, with optional pole mounting kit | ||
Enclosure type | Metal | ||
Enclosure dimensions | |||
MTP R 15HD RSA D | |||
Faceplate | 2.6" H* x 1.3" W x 0.24" D (6.6 cm H* x 3.3 cm W x 0.5 cm D) *Overall height is 4.1" (10.4 cm) including mounting tabs. (Fits the opening in a 1 gang, 4.4" H x 2.7" W decorator-style wallplate. Depth excludes connectors.) |
||
Device | 2.75" H x 1.65" W x 1.3" D (7.0 cm H x 4.2 cm W x3.3 cm D) (Depth excludes connectors.) |
||
MTP 4T 15HD RS | 1.7" H x 17.5" W x 8.5" D (1U high, full rack wide) (4.3 cm H x 44.4 cm W x 21.6 cm D) (Depth excludes connectors.) |
||
MTP 1500RL 15HD RS SEQ | 1.0" H x 8.75" W x 6.0" D (half rack wide) (2.5 cm H x22.2 cm W x15.2 cm D) (Depth excludes connectors.) |
||
All other models | 1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide) (4.3 cm H x 10.9 cm W x 7.6 cm D) (Depth excludes connectors.) |
||
Product weight | |||
MTP 4T 15HD RS | 6.0 lbs (2.7 kg) | ||
MTP 1500RL 15HD RS SEQ | 1 lb (0.5 kg) | ||
All other models | 0.4 lbs (0.2 kg) | ||
Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
Regulatory compliance | |||
Safety | CE, c-UL, UL | ||
EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI | ||
Warranty | 3 years parts and labor | ||
|
|||
|
|||
(CMS-041917-D11) |
可选附件 | ||
---|---|---|
Skew-Free UTP | 用于 Extron VT、MTP 和 TP 系列模拟双绞线产品的增强型 Skew-Free™ 等长视音频 UTP 电缆 | |
PS 124 | 多路输出 12 V 直流电源 | |
RSB 129 | Basic Rack Shelf for 9.5" Deep Products |
中国上海市松江区茸华路 686 号
(联系就说在DAV音视工程网上看到的)
Sales-China@Extron.com
021-3760 1566
爱思创电子(上海)有限公司(爱思创Extron中国)全球总部位于美国加州,是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、分配放大器、音频放大器、扬声器、双绞线和光纤设备、视频图像解析度转换器、视音频信号处理器、视音频流媒体产品、教室声场系统及高分辨率电缆。爱思创Extron电子提供专业视音频工程、培训、设计、演示支持。