Extron MLC 226 IP MediaLink 控制器是增强型控制面板，可控制任何小型教室或会议室中的视音频设备。它可对所有系统的控制接口进行标准化，使显示系统非常方便使用。标准化也使设置和维护的工作变得更加容易。MLC226IPL 还包含带 GlobalViewer ® 的IPLink ® ，这是一款基于 Web 的免费视音频资源管理和远程控制应用软件。
| 快速参考 |
|---|
| Everlast 电源 (宣传册) |
| MLC 226 IP (宣传册) |
| 可选附件 | ||
|---|---|---|
| NETXC M-M | Male to Male RJ-45 Network Crossover Cable | |
| Universal Projector Control Cables | Female 9-pin D Connector to Unterminated - Captive Screw Ready | |
| 红外发射器和屏蔽套件 | 用于 Extron 带红外输出产品的红外发射器套件 | |
| IRCM-DV+ | 双功能 DVD 和 VCR 红外控制模块 | |
| CM-9BLB | Nine-Button, Four Space AAP Control Module | |
| SCP 226 | 用于 MLC 226 IP、System 208 D 和 System 5 IP 的辅助控制面板 | |
| MLM 226 L | Replacement Lectern Mounting Kit for the MLC 226 IP | |
| UCM RAAP | 通用控制器安装机架套件 | |
| SMB 200 系列 | 用于 Extron 讲台系列前面板的薄型表面安装盒 | |
| MLM-WB+ | 带向下翻转 4U 机架空间的可锁定金属墙盒 | |
| 兼容的软件 | ||
|---|---|---|
| Global Configurator | 用于 TouchLink、MediaLink 和 IP Link 控制系统的免费配置软件 | |
| GlobalViewer Enterprise | 基于服务器的视音频资源管理软件 | |
| iGVE | 移动视音频资源管理应用程序 | |
| Extron Control | 用于 TouchLink、eBUS、网络按键面板和 MediaLink 的控制应用程序 | |
Extron MLC 226 IP MediaLink 控制器是增强型控制面板，可控制任何小型教室或会议室中的视音频设备。它可对所有系统的控制接口进行标准化，使显示系统非常方便使用。标准化也使设置和维护的工作变得更加容易。MLC226IPL 还包含带 GlobalViewer
® 的IPLink
® ，这是一款基于 Web 的免费视音频资源管理和远程控制应用软件。
特性
以太网监视和控制
用于通用显示设备控制的双向 RS-232 端口
独立的显示设备电源开关控制
2 个数字输入//输出端口
支持 MediaLink 切换器的 RS-232 端口
3 个红外/串行端口，用于外部设备的单向控制
6 个内部继电器，用于控制房间功能
支持 IP Intercom
提供数以千计的、已经过 Extron 认证的即用型驱动程序
可配置按键
宏功能
红外学习功能
三色背光按键，可定制标签以易于识别
用于自动关闭显示设备的待机计时器
前面板安全锁定
带音量指示的音量控制旋钮，用于显示设备或 MediaLink 切换器
随附预印刷按键标签
可选的 SCP 226 辅助控制面板，产品编号 # 60-672-xx
灵活的安装选择
薄型、3.2"（8.1 cm）高前面板，可安装在讲台或桌面上的紧凑空间内
使用 Extron UCM RAAP 或 UCM 10X8P 通用控制器安装套件安装在机架或墙面内；使用 Extron SMB 203 L 讲台系列安装盒安装在桌面上
随附外置 Extron Everlast™ 电源 — 该全球通用型电源具有经验证的高可靠性和低功耗，能够降低运行成本
Extron Everlast 电源可享受 7 年部件及人工保修
示意图
面板图
| MLC 226 Series | |||
| IP Intercom | |||
|---|---|---|---|
| Connection type (IPI–MLC) | RJ-45 jack for CAT 5/5e/6 cable | ||
| Audio | |||
| Frequency response | 20 Hz to 3.3 kHz, ±1 dB | ||
| Audio processing | |||
| Audio format | PCM, µ-law companded | ||
| Sampling rate | 8 kHz | ||
| Sample size | 16 bit, µ-law companded to 8 bit | ||
| Audio latency | Software: 30 ms through 160 ms Network: <150 ms, typical |
||
| Audio output | |||
| Number/signal type | 1 mono (for use with an optional IP Intercom) | ||
| Line level output | -10 dBV (316 mVrms), unbalanced (via 3.5 mm captive screw connector, 2 pole) | ||
| Communication | |||
| Transport bandwidth for IPI control and audio, half duplex | 80 kbps (0.08% of 100Base-T) | ||
| Ethernet protocol | IP (control), TCP (control), UDP (audio) | ||
| Control — host ports | |||
| Serial host port | 2 bidirectional RS-232: 1 rear panel female 9-pin D connector (shared with digital input), 1 front panel 2.5mm mini stereo jack | ||
| Baud rate and protocol | 38400 baud, 8 data bits, 1 stop bit, no parity | ||
| Serial control pin configurations | 9-pin D connector: 2 = Tx, 3 = Rx, 5 = Gnd Mini stereo jack: tip = Tx, ring = Rx, sleeve = Gnd |
||
| Ethernet host port | 1 female RJ-45 | ||
| Ethernet data rate (for network communication) | 10/100Base-T, half/full duplex with autodetect | ||
| Ethernet protocol | ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP, Telnet | ||
| Ethernet default settings | Link speed and duplex level = autodetected IP address = 192.168.254.254 Subnet mask = 255.255.0.0 Default gateway = 0.0.0.0 DHCP = off |
||
| Web server | Up to 200 simultaneous sessions 7.25 MB nonvolatile user memory |
||
| Secondary control panel (SCP) | (1) 3.5 mm 5-pole direct insertion captive screw connector (shared with control module port) | ||
| Program control | Extron Global Configurator for Windows ® Extron Simple Instruction Set (SIS ™ ) Microsoft ® Internet Explorer ®, Telnet |
||
| IR learning frequencies | 30 kHz to 62 kHz | ||
| IR learning distance | 2" (5.1 cm) to 12" (30.5 cm) from the front panel | ||
| Relay | |||
| Number/type | 6 momentary or latching (configurable via software) | ||
| Connectors | (3) 3.5 mm captive screw connectors, 3 pole | ||
| Connector configuration | Groups A, B, C; each with 1 common and 2 normally open relays (default) | ||
| Contact rating | 24 VDC, 1 A | ||
| Serial | |||
| Display control port | (1) 3.5 mm direct insertion captive screw connector, 3 pole, programmable for bidirectional RS-232 control (±5 V) or TTL level (0 to 5 V) infrared control up to 1 MHz | ||
| Switcher control port | (1) 3.5 mm direct insertion captive screw connector, 3 pole, for bidirectional RS-232 control (±5 V) | ||
| Baud rate and protocol (RS-232) | 115200 to 300 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits; no parity (default), or even or odd parity | ||
| IR/serial | |||
| IR/serial control ports | (3) 3.5 mm direct insertion captive screw connectors, 2 pole Programmable: unidirectional RS-232 (±5 V) control, or TTL level (0 to 5 V) infrared control up to 1 MHz |
||
| Baud rate and protocol | 115200 to 300 baud (9600 baud = default) ; 8 (default) or 7 data bits; 1 (default) or 2 stop bits; no parity (default), or even or odd parity | ||
| Digital I/O | |||
| Number/type | 1 digital input/output (configurable), 1 digital input | ||
| Connector | 1 rear panel female 9-pin D connector (shared with the serial host port) (1) 3.5 mm direct insertion captive screw connector (shared with power sense port) |
||
| Pin configuration | 9-pin D connector: 1 = digital input, 5 = Gnd; power sense = digital in, GND = Gnd | ||
| Digital inputs | |||
| Input voltage range | 0-12 VDC | ||
| Input impedance | 28k ohms | ||
| Programmable pullup | 2k ohms to +5 VDC | ||
| Threshold low to high | >2.8 VDC | ||
| Threshold high to low | <2.0 VDC | ||
| Digital output | 250 mA sink from 24 VDC, maximum | ||
| General | |||
| Power supply | External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1.5 A, 18 watt |
||
| Power consumption | |||
| MLC 226 IP DV+ | Includes MLC 226 IP and IRCM-DV+ | ||
| Device | 5.4 watts, 12 VDC | ||
| Device and power supply | 6.5 watts, 100-240 VAC, 50-60 Hz | ||
| All other models | |||
| Device | 5.0 watts, 12 VDC | ||
| Device and power supply | 6.4 watts, 100-240 VAC, 50-60 Hz | ||
|
|||
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
| Cooling | Convection, no vents | ||
| Thermal dissipation | |||
| MLC 226 IP DV+ | Includes MLC 226 IP and IRCM-DV+ | ||
| Device | 18.5 BTU/hr | ||
| Device and power supply | 21.9 BTU/hr | ||
| All other models | |||
| Device | 17.0 BTU/hr | ||
| Device and power supply | 21.8 BTU/hr | ||
| Mounting | |||
| Rack mount | |||
| MLC 226 IP DV+ | No | ||
| All other models | Yes, with optional rack mounting kits | ||
| Furniture or wall mount | |||
| MLC 226 IP DV+ | Yes | ||
| All other models | Yes, with optional mounting kits | ||
| Enclosure type | |||
| MLC 226 IP, MLC 226 IP DV+ | High-impact plastic faceplate, metal rear enclosure | ||
| MLC 226 IP AAP, MLC 226 IP L | Metal faceplate, metal rear enclosure | ||
| Enclosure dimensions | |||
| MLC 226 faceplate | 4.50" H x 6.42" W x 0.10" D (115 mm H x 163 nm W x2.6 mm D) (3 gang) | ||
| MLC 226 AAP, MLC 226 IP DV+ faceplates | 4.50" H x 10.04" W x 0.10" D (115 mm H x 256 mm W x 2.6 mm D) (5 gang) | ||
| MLC 226 L faceplate | 3.15" H x 6.50" W x 0.10" D (80 mm H x 166 mm W x2.6 mm D) | ||
| Device | |||
| MLC 226 IP DV+ | 2.74" H x 5.26" W x 1.94" D (70 mm H x 134 mm W x 50 mm D) and 2.74" H x 2.60" W x 0.90" D (70 mm H x 66 mm W x 23 mm D) (Depth excludes knob and buttons. Fits some 5 gang boxes. Allow at least 2.1" (53 mm) depth in the wall or furniture.) |
||
 |
|||
| All other models | 2.74" H x 5.26" W x 1.94" D (70 mm H x 134 mm W x 50 mm D) (Depth excludes knob and buttons. Fits some 3 gang boxes.) |
||
 |
|||
| Product weight | |||
| MLC 226 IP DV+ | 1.0 lbs (0.5 kg) | ||
| All other models | 0.7 lbs (0.3 kg) | ||
| Regulatory compliance | CE, C-Tick, c-UL, FCC Class A, ICES, KC mark, UL, VCCI Complies with the appropriate requirements of Section 508 of the Rehabilitation Act (29U.S.C.794d). |
||
| Product warranty | 3 years parts and labor | ||
| Everlast power supply warranty | 7 years parts and labor | ||
|
|||
|
|||
| (4408-D16-100118) | |||
| 可选附件 | ||
|---|---|---|
| NETXC M-M | Male to Male RJ-45 Network Crossover Cable | |
| Universal Projector Control Cables | Female 9-pin D Connector to Unterminated - Captive Screw Ready | |
| 红外发射器和屏蔽套件 | 用于 Extron 带红外输出产品的红外发射器套件 | |
| IRCM-DV+ | 双功能 DVD 和 VCR 红外控制模块 | |
| CM-9BLB | Nine-Button, Four Space AAP Control Module | |
| SCP 226 | 用于 MLC 226 IP、System 208 D 和 System 5 IP 的辅助控制面板 | |
| MLM 226 L | Replacement Lectern Mounting Kit for the MLC 226 IP | |
| UCM RAAP | 通用控制器安装机架套件 | |
| SMB 200 系列 | 用于 Extron 讲台系列前面板的薄型表面安装盒 | |
| MLM-WB+ | 带向下翻转 4U 机架空间的可锁定金属墙盒 | |
中国上海市松江区茸华路 686 号
(联系就说在DAV音视工程网上看到的)
Sales-China@Extron.com
021-3760 1566
爱思创电子（上海）有限公司（爱思创Extron中国）全球总部位于美国加州，是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、分配放大器、音频放大器、扬声器、双绞线和光纤设备、视频图像解析度转换器、视音频信号处理器、视音频流媒体产品、教室声场系统及高分辨率电缆。爱思创Extron电子提供专业视音频工程、培训、设计、演示支持。
DAV首页