Extron PowerCage FOX Rx AV 光纤发送器是一款设计用于 PowerCage ® 1600 机箱的模块化板卡,可通过单根光纤长距离传输标清视频、音频和 RS-232 控制信号。其设计注重可靠性和出色的视频性能表现,使用 Extron 全数字技术对视频信号 (包括分量视频、S-视频和复合视频) 进行完美的像素对像素的传输。PowerCage FOX Rx AV 专门设计用于视音频系统,还包括许多便于集成的特性,如视频格式转换、图像和音频调整、菊花链功能以及实时的系统监控。
相兼容的发送器 | ||
---|---|---|
FOX Tx AV | 用于视频、音频和 RS-232 信号的光纤发送器 |
可选附件 | ||
---|---|---|
MBD 129 | Through-Desk Mount Kit for 1/4 or 1/2 Rack Width, Two-Piece Enclosures | |
MBU 125 | 用于 1/4 和 1/2 机架宽、两部件式产品的薄型安装套件 | |
RSB 126 | Basic Rack Shelf for 6" Deep Products | |
RSU 126 | 用于 6" 深产品的通用型机架搁板套件 | |
RFF 系列 | 基础型机架空白面板套件 | |
2LC OM4 MM P | LC 至 LC 激光优化多模成品光纤 – 阻燃级 | |
2LC SM P | LC 至 LC 弯曲不敏感的单模成品光纤 – 阻燃级 |
相关产品 | ||
---|---|---|
PowerCage 1600 | 用于光纤延长器的模块化电源机箱 |
Extron PowerCage FOX Rx AV 光纤发送器是一款设计用于 PowerCage ® 1600 机箱的模块化板卡,可通过单根光纤长距离传输标清视频、音频和 RS-232 控制信号。其设计注重可靠性和出色的视频性能表现,使用 Extron 全数字技术对视频信号 (包括分量视频、S-视频和复合视频) 进行完美的像素对像素的传输。PowerCage FOX Rx AV 专门设计用于视音频系统,还包括许多便于集成的特性,如视频格式转换、图像和音频调整、菊花链功能以及实时的系统监控。
特性
接收来自 FOX 系列 AV 发送器的光纤信号,并提供标清视频、立体声音频和 RS-232 控制信号
接受分量视频、S-视频和复合视频信号
全数字技术提供了像素对像素的性能
设计用于 PowerCage 1600 机箱的模块化、可热插拔的板卡,产品编号 # 60-978-01
图像和音频调整
可选择输出格式的内置转码功能
提供用于中等范围传输的 850 nm 多模和用于极长距离(最远可达 30 km)传输的 1310 nm 单模型号
RS-232 控制
光纤链路丢失时的警报通知
菊花链功能
经 JITC 认证
示意图
PowerCage 1600
面板图
PowerCage™ FOX Rx AV | |||
|
|||
|
|||
Optical fiber interconnection between transmitter and receiver | |||
---|---|---|---|
Number/type | 1 singlemode or 1 multimode fiber optic input and output per board | ||
|
|||
Connectors | 2 bidirectional LC connectors per board | ||
Operating distance | |||
Singlemode | 30 km (18.75 miles) with singlemode (SM) cables with a SM board | ||
Multimode | 300 m (985') with 62.5 µm OM1 multimode (MM) cable and a MM board 1 km (3280') with 50 µm OM2 multimode (MM) cable and a MM board 2 km (6561') with 50 µm OM3/OM4 2000 MHz bandwidth laser optimizedMM cable and a MM board |
||
|
|||
Nominal peak wavelength | 850 nm for multimode (MM), 1310 nm for singlemode (SM) | ||
Transmission power, singlemode or multimode | -5 dBm, typical | ||
Maximum receiver sensitivity | |||
Singlemode | -18 dBm, typical | ||
Multimode | -12 dBm, typical | ||
Optical loss budget | |||
Singlemode | 13 dB, maximum | ||
Multimode | 7 dB, maximum | ||
Maximum channel data rate | 2.125 Gbps | ||
Video | |||
|
|||
Gain | Unity | ||
Standards | |||
Input | NTSC 3.58, NTSC 4.43, PAL, SECAM, autodetected | ||
Output | NTSC 3.58, PAL (follows vertical rate) | ||
Decoder type | Adaptive 2D, digital comb filter | ||
Video output | |||
Number/signal type | 1 component (Y, R-Y, B-Y) video, S-video, composite video | ||
Connectors | 1 x 3 female BNC or 1 female 4-pin mini DIN for S-video | ||
Nominal levels | 1.0 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for R-Y, B-Y of component video 0.3 Vp-p for C of S-video |
||
Minimum/maximum levels | 0.3 V to 1.5 Vp-p | ||
Impedance | 75 ohms | ||
Return loss | >40 dB @ 5 MHz | ||
DC offset | +350mV, maximum, with input at 0 offset | ||
Video delay | 1-2 frames | ||
Audio | |||
|
|||
Gain | |||
Range | Adjustable, -18 dB to +10 dB | ||
Default | Unbalanced output: -6 dB; balanced output: 0 dB | ||
Frequency response | 20 Hz to 20 kHz, ±0.5 dB | ||
THD + Noise | 0.15% @ 1 kHz at nominal level | ||
S/N | >80 dB at maximum output (unweighted) | ||
CMRR | 65 dB @ 20 Hz to 20 kHz | ||
Audio bits per sample | 18 bits per channel, 2 channels (L, R) | ||
Sampling rate | 48 kHz | ||
Audio output | |||
Number/signal type | 1 stereo, balanced/unbalanced or 2 mono, balanced/unbalanced |
||
Connectors | (1) 3.5 mm captive screw connector, 5 pole | ||
Impedance | 50 ohms unbalanced, 100 ohms balanced | ||
Nominal level | +4 dBu (1.23 Vrms), -10 dBV (316 mVrms) | ||
Maximum level (Hi-Z) | >+19 dBu, unbalanced at 1% THD+N | ||
Maximum level (600 ohm) | >+15 dBm, unbalanced at 1% THD+N | ||
Audio delay | 1.5 frames | ||
Control/remote | |||
Serial control ports | |||
Control | 1 bidirectional RS-232, 3.5 mm captive screw connector, 5 pole (uses 3 poles; shared with the alarm port) | ||
Pass-through | 1 RS-232, 3.5 mm captive screw connector, 5 pole (uses 3 poles, "RS-232 Over Fiber") | ||
Baud rate and protocol | |||
Control | 9600 baud, 8 data bits, 1 stop bit, no parity | ||
Pass-through | 9600 to 115,200 baud | ||
Serial control pin configuration | 1 = Tx, 2 = Rx, 3 = GND | ||
Program control | Extron control/configuration program for Windows ® Extron Simple Instruction Set (SIS ™ ) |
||
General | |||
Power | Supplied by a PowerCage 1600 enclosure | ||
Power consumption | 5.57 watts | ||
Power input requirements | 12 VDC, 1.0 A, supplied by the PowerCage enclosure | ||
Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
Cooling | Enclosure: fans, front to back Boards: convection, within the PowerCage enclosure |
||
Thermal dissipation | 27.6 BTU/hr | ||
Dimensions | Each fits a double slot opening in a PowerCage enclosure. | ||
Product weight | 1.1 lbs (0.5 kg) | ||
Shipping weight | 2 lbs (1 kg) | ||
Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
Regulatory compliance | |||
Safety | CE, c-UL, UL | ||
EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI | ||
Environmental | Complies with the appropriate requirements of RoHS, WEEE. | ||
Product warranty | 3 years parts and labor | ||
|
|||
|
|||
(8.1-112114-D2) |
可选附件 | ||
---|---|---|
MBD 129 | Through-Desk Mount Kit for 1/4 or 1/2 Rack Width, Two-Piece Enclosures | |
MBU 125 | 用于 1/4 和 1/2 机架宽、两部件式产品的薄型安装套件 | |
RSB 126 | Basic Rack Shelf for 6" Deep Products | |
RSU 126 | 用于 6" 深产品的通用型机架搁板套件 | |
RFF 系列 | 基础型机架空白面板套件 | |
2LC OM4 MM P | LC 至 LC 激光优化多模成品光纤 – 阻燃级 | |
2LC SM P | LC 至 LC 弯曲不敏感的单模成品光纤 – 阻燃级 |
中国上海市松江区茸华路 686 号
(联系就说在DAV音视工程网上看到的)
Sales-China@Extron.com
021-3760 1566
爱思创电子(上海)有限公司(爱思创Extron中国)全球总部位于美国加州,是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、分配放大器、音频放大器、扬声器、双绞线和光纤设备、视频图像解析度转换器、视音频信号处理器、视音频流媒体产品、教室声场系统及高分辨率电缆。爱思创Extron电子提供专业视音频工程、培训、设计、演示支持。