MTP/HDMI U R 是一款通用型双绞线接收器，它在单一产品中整合了数字和模拟视频格式。它与 MTP/HDMIUTAD和 HDMI201 / DVI201 发送器配合使用时，可以通过两根双绞线电缆传输 HDM 或 DVI 信号，与 MTP 系列发送器配合使用时则可以通过一根双绞线电缆传输所有常见的模拟视频格式，从复合视频到 HDTV 和高分辨率 RGB 信号，以及单声道音频信号。MTP/HDMI U R 符合 HDCP 标准，并可通过任何一路双绞线输入接收双向 RS-232 信号，从而对显示设备进行远程控制。它也为输入的 MTP 信号提供了单独的可变电平和峰值控制及自动信号格式检测。
| 快速参考 |
|---|
| MTP/HDMI U R (宣传册) |
| MTP/HDMI U R Setup Guide (用户手册) |
| MTP/HDMI U R User Guide (用户手册) |
| 相兼容的发送器 | ||
|---|---|---|
| MTP U T A D | 用于 VGA、视频和音频的通用型 MTP 双绞线发送器 - Decorator 型墙面板 | |
| 可选附件 | ||
|---|---|---|
| PMK 155 | 用于 1/8、1/4 或 1/2 机架宽产品的杆式安装套件 | |
| RSF 123 | 用于 3.5" 深产品的机架搁板套件 | |
| RSU 126 | 用于 6" 深产品的通用型机架搁板套件 | |
| MBU 123 | 用于 1/8、1/4 和 1/2 机架宽产品的薄型安装套件 | |
| PMK 100 | 用于 1/4 机架宽产品的杆式安装套件 | |
| PS 124 | 多路输出 12 V 直流电源 | |
| Skew-Free UTP | 用于 Extron VT、MTP 和 TP 系列模拟双绞线产品的增强型 Skew-Free™ 等长视音频 UTP 电缆 | |
| STP RJ-45 插头 | 用于 Extron STP201 数字双绞线电缆的屏蔽 RJ45 插头 | |
| ZipClip 100 | 用于 PS 系列电源的安装套件 | |
MTP/HDMI U R 是一款通用型双绞线接收器，它在单一产品中整合了数字和模拟视频格式。它与 MTP/HDMIUTAD和 HDMI201 / DVI201 发送器配合使用时，可以通过两根双绞线电缆传输 HDM 或 DVI 信号，与 MTP 系列发送器配合使用时则可以通过一根双绞线电缆传输所有常见的模拟视频格式，从复合视频到 HDTV 和高分辨率 RGB 信号，以及单声道音频信号。MTP/HDMI U R 符合 HDCP 标准，并可通过任何一路双绞线输入接收双向 RS-232 信号，从而对显示设备进行远程控制。它也为输入的 MTP 信号提供了单独的可变电平和峰值控制及自动信号格式检测。
特性
通过 CATx 电缆接受数字和模拟视频格式、音频以及控制信号
将输入的模拟视频信号自动路由至相应的输出连接器
数字输出： - 符合 HDCP 标准 - 每个颜色支持高达 1.65Gbps 的数据速率 - 支持 EDID 和 HDCP 传输 - 支持双向 RS-232 或红外信号
模拟输出： - 支持 RGBHV、高清分量视频、S-视频、复合视频、单声道音频和 RS-232 信号 - 独立的可变电平和峰值控制 - 支持双向 RS-232 信号 - 兼容 HDTV 分量视频，双电平或三电平同步 - 双单声道音频输出 - MTP/HDMIUR 输出平衡或非平衡双单声道音频信号
UL 2043 阻燃级 - MTP/HDMI U R 符合 UL 2043 关于热量和烟雾排放的规定，不包括电源
随附外置 Extron Everlast™ 电源，产品编号 #70-1174-01 — 该全球通用型电源具有经验证的高可靠性和低功耗
Extron Everlast 电源具有 7 年部件和人工保修
示意图
面板图
| MTP/HDMI U R | |||
| Video | |||
|---|---|---|---|
| MTP input | |||
| Gain | Unity | ||
| Maximum resolution | |||
| Analog | Up to 2048x1080 or 1080p @ 60 Hz | ||
| Signal transmission distance, analog |  |
||
| HDMI digital input | |||
| Maximum data rate | 4.95 Gbps (1.65 Gbps per color) | ||
| Maximum pixel clock | 165 MHz | ||
| Maximum resolution | |||
| Digital | Up to 1920x1200 or 1080p @ 60 Hz | ||
| Signal transmission distance, digital |  |
||
|
|||
|
|||
| Formats | RGB and YCbCr digital video | ||
| Standards | DVI 1.0, HDMI 1.2 | ||
| Video input | |||
| Number/signal type | |||
| MTP input | 1 set of proprietary analog signals | ||
| HDMI digital input | 1 set of proprietary digital signals | ||
| Connectors | |||
| MTP input | 1female RJ-45 | ||
| HDMI digital input | 2 female RJ-45 | ||
| Video output | |||
| Number/signal type | |||
| Analog output | 1 RGBHV, RGBS, component video (bi-level and tri-level), S-video, composite video (follows input type) | ||
| HDMI digital output | 1 single link HDMI (or DVI-D*) | ||
|
|||
| Connectors | |||
| Analog output | 1 female 15-pin HD for RGB 3 female BNC for Y, R-Y, B-Y 1 female4-pin mini DIN for S-video (Y/C) 1 female BNC for composite video |
||
| HDMI digital output | 1 female HDMI type A | ||
| Nominal levels | Analog outputs: 1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video |
||
| Minimum/maximum levels | Analog outputs: 0.8 V to 1.2 Vp-p | ||
| Impedance | Analog outputs: 75 ohms (during video output only) | ||
| Return loss | Analog outputs: <-30 dB @ 5 MHz (during video output only) | ||
| DC offset | Analog outputs: <±20 mV with input at 0 offset | ||
| Sync — analog outputs | |||
| Output type | RGBHV, RGBS, component video (bi- or tri-level) | ||
| Standards | NTSC 3.58, NTSC 4.43, PAL, SECAM | ||
| Output level | 4.0 V to 5.0 Vp-p, unterminated | ||
| Output impedance | 87 ohms (24 mA) | ||
| Polarity | Positive or negative (selectable) | ||
| Audio — from MTP input | |||
| Gain | Unbalanced output: 0 dB; balanced output: +6 dB | ||
| Frequency response | 20 Hz to 20 kHz, ±1 dB | ||
| THD + Noise | 0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level | ||
| S/N | >70 dB at maximum output (unweighted) | ||
| Audio input — fromMTP input, see MTP transmitter's audio output specifications | |||
| Number/signal type | 1 set of proprietary analog signals | ||
| Connectors | 1 female RJ-45 | ||
|
|||
| Audio output — from MTP input | |||
| Number/signal type | 2 mono, balanced/unbalanced | ||
| Connectors | (1) 3.5 mm captive screw connector, 5 pole | ||
| Impedance | 50 ohms unbalanced, 100 ohms balanced | ||
| Gain error | ±1 dB channel to channel | ||
| Control/remote — external device (pass-through) from the HDMI input | |||
| Serial control port input/output | RS-232 via (1) 3.5 mm, 3 pole captive screw connector | ||
| Serial control pin configuration | Captive screw connector: 1 = Tx, 2 = Rx, 3 = GND | ||
| Control/remote — external device (pass-through, unidirectional or bidirectional) from theMTP input | |||
| Serial control port input/output | RS-232 via (1) 3.5 mm, 5 pole captive screw connector (3 poles are used) | ||
| Baud rates | Up to 38400 bps at up to 600' (183 m) (Higher data rates and distances are possible. Performance varies based on baud rate and cable length.) |
||
| Protocol | Data bits = 5 - 8 Stop bits = 1 or 2 Parity = odd, even, none Flow control = XON, XOFF, none |
||
|
|||
| Serial control pin configuration | Captive screw connector: 1 = Tx, 2 = Rx, 3 = GND | ||
| General | |||
| Recommended cable type | Shielded or unshielded | ||
| MTP input | CAT 5/5e/6 | ||
| HDMI digital input | CAT 5/5e/6, Extron STP201 | ||
|
|||
| Power supply | External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1 A, 12 watts |
||
| Power input requirements | 12 VDC, 0.8 A | ||
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
| Cooling | Convection, no vents | ||
| Thermal dissipation | 18.1 BTU/hr | ||
| Mounting | |||
| Rack mount | Yes, with optional 1U rack shelf | ||
| Furniture mount | Yes, with optional under-desk mounting kit | ||
| Pole mount | Yes, with optional projector mounting kit | ||
| Enclosure type | Metal | ||
| Enclosure dimensions | 1.7" H x 8.75" W x 3.0" D (half rack wide) (4.3 cm H x 22.2 cm W x 7.6 cm D) (Depth excludes connectors.) |
||
| Product weight | 0.8 lbs (0.4 kg) | ||
| Shipping weight | 2 lbs (1 kg) | ||
| Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
| Regulatory compliance | |||
| Safety | CE, c-UL, UL UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release, excluding the power supply. |
||
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI | ||
| Product warranty | 3 years parts and labor | ||
|
|||
|
|||
| (8.0-060811-D14) | |||
| 可选附件 | ||
|---|---|---|
| PMK 155 | 用于 1/8、1/4 或 1/2 机架宽产品的杆式安装套件 | |
| RSF 123 | 用于 3.5" 深产品的机架搁板套件 | |
| RSU 126 | 用于 6" 深产品的通用型机架搁板套件 | |
| MBU 123 | 用于 1/8、1/4 和 1/2 机架宽产品的薄型安装套件 | |
| PMK 100 | 用于 1/4 机架宽产品的杆式安装套件 | |
| PS 124 | 多路输出 12 V 直流电源 | |
| Skew-Free UTP | 用于 Extron VT、MTP 和 TP 系列模拟双绞线产品的增强型 Skew-Free™ 等长视音频 UTP 电缆 | |
| STP RJ-45 插头 | 用于 Extron STP201 数字双绞线电缆的屏蔽 RJ45 插头 | |
| ZipClip 100 | 用于 PS 系列电源的安装套件 | |
中国上海市松江区茸华路 686 号
(联系就说在DAV音视工程网上看到的)
Sales-China@Extron.com
021-3760 1566
爱思创电子（上海）有限公司（爱思创Extron中国）全球总部位于美国加州，是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、分配放大器、音频放大器、扬声器、双绞线和光纤设备、视频图像解析度转换器、视音频信号处理器、视音频流媒体产品、教室声场系统及高分辨率电缆。爱思创Extron电子提供专业视音频工程、培训、设计、演示支持。
DAV首页