The Extron DMS DVI Matrix Boards are single-link DVI I/O boards for the DMS Series matrix switchers. The DMSDVIMatrix Boards provide automatic cable equalization to 100feet (30meters) at 1920x1200/8-bit color when used with Extron DVIPro cables. To enable transmission over long DVI cables, the DMSDVIMatrix boards provide automatic output reclocking, which reshapes and restores the timing of DVI signals at each output. For installation convenience and flexibility, the boards supply +5VDC, 250mA of power on each output for external peripheral devices. They are available in 4x4 I/O, 4-input, and 4-output configurations, and can be can be mixed-and-matched with available DMSSeries FiberMatrix Boards for optimum flexibility in system design.
| 快速参考 |
|---|
| DMS 系列 (宣传册) |
| 相关产品 | ||
|---|---|---|
| DMS 2000 和 DMS 3200 | 模块化 DVI 矩阵切换器 | |
| DMS 1600 和 DMS 3600 | 模块化 DVI 矩阵切换器 | |
The Extron DMS DVI Matrix Boards are single-link DVI I/O boards for the DMS Series matrix switchers. The DMSDVIMatrix Boards provide automatic cable equalization to 100feet (30meters) at 1920x1200/8-bit color when used with Extron DVIPro cables. To enable transmission over long DVI cables, the DMSDVIMatrix boards provide automatic output reclocking, which reshapes and restores the timing of DVI signals at each output. For installation convenience and flexibility, the boards supply +5VDC, 250mA of power on each output for external peripheral devices. They are available in 4x4 I/O, 4-input, and 4-output configurations, and can be can be mixed-and-matched with available DMSSeries FiberMatrix Boards for optimum flexibility in system design.
特性
Available in 4-port input, 4-port output, and 4x4 I/O versions
Supports data rates to 4.95Gbps - 1.65Gbps per color
Supports computer video up to 1920x1200, including HDTV 1080p/60
Automatic cable equalization for each DVI input to 100feet (30meters) at 1920x1200/8-bit color when used with Extron DVIPro cables
Automatic output reclocking — Reshapes and restores timing of signals at each DVI output, enabling transmission over long DVI cables.
Provides +5VDC, 250mA power on each DVI output for external peripheral devices
Hot-swappable design — Allows the replacement of an I/O board at any time without the need to power down the switcher.
Mix-and-match with DMSFiber Matrix Boards in a DMSframe for optimum flexibility in system design
| DMS 1600, DMS 2000, DMS 3200, and DMS 3600 Series | |||
| Video — DMS DVI | |||
|---|---|---|---|
| Routing | |||
| 1600 Series | From 4 x 4 to 16 x 16 matrix, expandable by increments of 4 inputs and 4 outputs | ||
| 2000 Series | From 4 x 4 to20 x20 matrix, expandable by increments of 4 inputs and 4 outputs | ||
| 3200 Series | From 4 x 4 to32 x32 matrix, expandable by increments of 4 inputs and 4 outputs | ||
| 3600 Series | From 4 x 4 to 36 x 36 matrix, expandable by increments of 4 inputs and 4 outputs | ||
| Gain | Unity | ||
| Resolution range | Up to 1080p (HDTV) or 1920x1200 (the highest resolution of the single link DVI standard) @ 48, 50, or 60 Hz | ||
| Signal type | Single-link DVI digital video signals are supported. | ||
| Digital video | RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single link DVI and HDMI [if using an optional adapter] standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video) | ||
|
|||
| Digital audio | Embedded audio from HDMI sources can be passed, as long as it is not HDCP encrypted content | ||
| Consumer Electronics Control (CEC) | Not supported | ||
| EDID and DDC | Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered. | ||
| HDCP | Not supported | ||
| HPD | Supports hot plug detection (HPD) of display as a pass-through signal. | ||
| Maximum data rate | 4.95 Gbps (1.65 Gbps per color) | ||
| Maximum pixel clock | 165 MHz | ||
| Standards | DVI 1.0 | ||
| Switching speed | 200 ns, max. | ||
| Video input — DMS 44 DVIand DMS 4i DVI input boards | |||
| Number/signal type | 4 digital RGB single link DVI-D per input board | ||
| Connectors | 4 female DVI-I (digital only) per input board | ||
| Equalization | Automatic | ||
| Input cable length | 100' (30 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p; 8 bit color | ||
|
|||
| Video output — DMS 44 DVI and DMS 4o DVI output boards | |||
| Number/signal type | 4 digital RGB single link DVI-D per output board | ||
| Connectors | 4 female DVI-I (digital only) per output board | ||
| Re-clocking | Automatic | ||
| Output cable length | 50' (15.24 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p | ||
| Peripheral device power | 250 mA per output | ||
| Optical specifications — fiber optic boards | |||
|
|||
| Number/type | 4 multimode fiber optic inputs and outputs (4 Tx and 4 Rx) per I/O board | ||
| Connectors | 4 or 8 LC connectors per I/O board | ||
| Operating distance | 300 m (985') | ||
|
|||
| Nominal peak wavelength | 850 nm for multimode (MM) | ||
| Transmission power | -5 dBm, typical | ||
| Maximum receiver sensitivity | -12 dBm, typical | ||
| Optical loss budget | 8dB, maximum | ||
| Maximum channel data rate | 6.25 Gbps | ||
| Video — fiber optic (DMS 44, DMS 4i, and DMI 4o fiber boards) | |||
| Routing | |||
| 1600 Series | 4 x 4 to 16 x 16 matrix, expandable by increments of 4 inputs and 4 outputs | ||
| 2000 Series | 4 x 4 to 20 x 20 matrix, expandable by increments of 4 inputs and 4 outputs | ||
| 3200 Series | 4 x 4 to 32 x 32 matrix, expandable by increments of 4 inputs and 4 outputs | ||
| 3600 Series | 4 x 4 to 36 x 36 matrix, expandable by increments of 4 inputs and 4 outputs | ||
| Video input — DMS 44 fiber and DMS 4i fiber input boards | |||
|
|||
| Number/signal type | 4 fiber optic, multimode (OM3 or OM4 fiber recommended) | ||
| Connectors | 4 LC connectors | ||
| Input cable length | 300 m (985') | ||
|
|||
| Video output — DMS 44 fiber and DMS 4o fiber output boards | |||
|
|||
| Number/signal type | 4 fiber optic, multimode (OM3 or OM 4 recommended) | ||
| Connectors | 4 LC connectors per board | ||
| Output cable length | 300 m (985') | ||
| Communications — switcher host ports | |||
| Serial host control port | 1 bidirectional RS-232 or RS-422, rear panel 9-pin female D connector | ||
| Baud rate and protocol | 9600 (default), 19200, 38400, 115200 baud, adjustable; 8 data bits, 1 stop bit, no parity | ||
| Serial control pin configurations | |||
| 9-pin female D connector | |||
| RS-232 | 2 = Tx, 3 = Rx, 5 = Gnd | ||
| RS-422 | 2 = Tx-, 3 = Rx-, 5 = Gnd, 7 = Rx+, 8 = Tx+ | ||
| USB control ports | 1 front panel female mini USB B | ||
| USB standards | USB 2.0, low speed | ||
| Ethernet control port | 1 RJ-45 female | ||
| Ethernet data rate (for network communication) | 10/100Base-T, half/full duplex with autodetect | ||
| Ethernet protocol | ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP, Telnet | ||
| Ethernet default settings | Link speed and duplex level = autodetected IP address = 192.168.254.254 Subnet mask = 255.255.0.0 Default gateway = 0.0.0.0 DHCP = off |
||
| Web server | Up to 200 simultaneous sessions 7.0 MB nonvolatile user memory |
||
| Program control | Extron control/configuration program for Windows ® Extron Simple Instruction Set (SIS ™ ) Microsoft ® Internet Explorer ® ver. 6 or higher, Telnet |
||
| General | |||
| Power supply | |||
| DMS 1600 | Internal: 1 or 2* (positive-negative) Input: 100-240 VAC, 50-60 Hz *A redundant power supply is optional. |
||
| DMS 2000 | Internal: 1 Input: 100-240 VAC, 50-60 Hz |
||
| DMS 3200 | Internal: 1 Input: 100-240 VAC, 50-60 Hz |
||
| DMS 3600 | Internal, 2*(positive-negative) Input: 100-240 VAC, 50-60 Hz *A redundant power supply is standard. |
||
| Power consumption | |||
| DMS 1600 | Primary power supply: 97 watts Primary and redundant supplies: 107 watts Measured fully loaded with (4) 4x4 I/O boards |
||
| DMS 2000 | 116watts Measured fully loaded with (5) 4x4 I/O boards |
||
| DMS 3200 | 174watts Measured fully loaded with (8) 4x4 I/O boards |
||
| DMS 3600 | 212 watts Measured fully loaded with (9) 4x4 I/O boards |
||
| I/O boards |  |
||
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
| Cooling | Fan, right to left (as viewed from front panel) | ||
| Thermal dissipation, full load | |||
| DMS 1600 | Primary power supply: 332 BTU/hr Primary and redundant supplies: 366 BTU/hr Measured fully loaded with (4) 4x4 I/O boards |
||
| DMS 2000 | 398BTU/hr Measured fully loaded with (5) 4x4 I/O boards |
||
| DMS 3200 | 596BTU/hr Measured fully loaded with (8) 4x4 I/O boards |
||
| DMS 3600 | 724 BTU/hr Measured fully loaded with (9) 4x4 I/O boards |
||
| Rack mount | Yes | ||
| Enclosure type | Metal | ||
| Enclosure dimensions | |||
| DMS 1600 | 7.0" H x 17.0" W x 12" D (4U high, full rack wide) (13.3 cm H x 43.2 cm W x 30.5 cm D) (Depth excludes connectors and buttons. Width excludes rack ears.) |
||
| DMS 2000 | 5.2" H x 17.0" W x 12.2" D (3U high, full rack wide) (13.3 cm H x 43.2 cm W x 31.0 cm D) (Depth excludes connectors and buttons. Width excludes rack ears.) |
||
| DMS 3200 | 8.7" H x 17.0" W x 12.2" D (5U high, full rack wide) (22.1 cm H x 43.2 cm W x 31.0 cm D) (Depth excludes connectors and buttons. Width excludes rack ears.) |
||
| DMS 3600 | 14.0" H x 17.0" W x 12.25" D (8U high, full rack wide) (35.6cm H x 43.1 cm W x 31.1 cm D) (Depth excludes connectors and handles. Width excludes rack ears.) |
||
| Product weight with boards installed | |||
| DMS 1600 | |||
| With primary power supply only | 26.9 lbs (12.2 kg) | ||
| With both primary and redundant power supplies | 27.9 lbs (12.6 kg) | ||
| DMS 2000 | 16.4lbs (7.5 kg) | ||
| DMS 3200 | 27.1 lbs (12.3 kg) | ||
| DMS 3600 | 38.5 lbs (17.5 kg) | ||
| Shipping weight with boards installed | |||
| DMS 1600 | 32 lbs (15 kg) | ||
| DMS 2000 | 21lbs (10 kg) | ||
| DMS 3200 | 33lbs (15 kg) | ||
| DMS 3600 | 48 lbs (22 kg) | ||
| DIM weight with boards installed | |||
| USA/Canada | |||
| DMS 2000 | 23 lbs (11 kg) | ||
| DMS 3200 | 39 lbs (18 kg) | ||
| International | |||
| DMS 2000 | 28 lbs (13 kg) | ||
| DMS 3200 | 47 lbs (22 kg) | ||
| DMS 3600 | 52 lbs (24 kg) | ||
| Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
| Regulatory compliance | |||
| Safety | CE, c-UL, UL | ||
| EMI/EMC | |||
| DMS 1600 and DMS 3600 | CE, C-tick, FCC Class A, ICES, KCC, VCCI | ||
| DMS 2000 and DMS 3200 | CE, C-tick, FCC Class A, ICES, VCCI | ||
| Environmental | Complies with the appropriate requirements of RoHS, WEEE | ||
| Product warranty | 3 years parts and labor | ||
|
|||
|
|||
| (8.1-061914-D10) | |||
中国上海市松江区茸华路 686 号
(联系就说在DAV音视工程网上看到的)
Sales-China@Extron.com
021-3760 1566
爱思创电子（上海）有限公司（爱思创Extron中国）全球总部位于美国加州，是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、分配放大器、音频放大器、扬声器、双绞线和光纤设备、视频图像解析度转换器、视音频信号处理器、视音频流媒体产品、教室声场系统及高分辨率电缆。爱思创Extron电子提供专业视音频工程、培训、设计、演示支持。
DAV首页