Extron产品

我的位置：首页/ Extron产品

模块化 DVI 矩阵切换器

模块化 DVI 矩阵切换器 DMS 2000 和 DMS 3200 产品型号：DMS 2000 和 DMS 3200 产品状态：在产
产品价格：面议 品牌：爱思创EXTRON

产品介绍

产品参数

相关附件

产品图片

产品附件

　　Extron DMS 系列模块化 DVI 矩阵切换器 代表了 DVI 矩阵切换的一个新水准。它们将固定输入/输出矩阵切换器的简便性和可靠性与模块化矩阵切换器的方便性和灵活性相结合。DMS 系列矩阵切换器可接受 DMSDVI 或 DMS光纤矩阵板的任意组合。可提供 4 路输入、4 路输出和 4x4 输入/输出板，根据选定的 DMS 矩阵切换器机箱，提供了从 4x4 至 32x32 不等的多种输入/输出尺寸组合。DMS 系列适用于广泛的应用环境，可以对无版权保护的高分辨率 DVI 数字视频信号进行路由。

快速参考
DMS 系列 (宣传册)

可选附件
DMS DVI Matrix Boards	DVI Matrix Boards for DMS Series Matrix Switchers
DMS 光纤矩阵板	用于 DMS 系列矩阵切换器的单根光纤多模矩阵板

　　Extron DMS 系列模块化 DVI 矩阵切换器 代表了 DVI 矩阵切换的一个新水准。它们将固定输入/输出矩阵切换器的简便性和可靠性与模块化矩阵切换器的方便性和灵活性相结合。DMS 系列矩阵切换器可接受

　　DMSDVI 或

　　DMS光纤矩阵板的任意组合。可提供 4 路输入、4 路输出和 4x4 输入/输出板，根据选定的 DMS 矩阵切换器机箱，提供了从 4x4 至 32x32 不等的多种输入/输出尺寸组合。DMS 系列适用于广泛的应用环境，可以对无版权保护的高分辨率 DVI 数字视频信号进行路由。

　　特性

　　根据选定的 DMS 矩阵切换器机箱，输入/输出尺寸从 4x4 到 20x20 或 32x32 不等

　　模块化和可现场升级的设计

　　备有 DMS DVI 或光纤矩阵输入/输出板供选择

　　支持高达 4.95 Gbps 的数据速率 - 每种颜色 1.65 Gbps

　　EDID 管理器 (EDID Minder ^® ) 自动地管理已连接设备之间的 EDID 通信

　　以太网监视和控制

　　控制软件

　　示意图

Product Diagram

　　面板图

Panel Drawing

DMS 1600, DMS 2000, DMS 3200, and DMS 3600 Series

Video — DMS DVI

Routing

1600 Series

From 4 x 4 to 16 x 16 matrix, expandable by increments of 4 inputs and 4 outputs

2000 Series

From 4 x 4 to20 x20 matrix, expandable by increments of 4 inputs and 4 outputs

3200 Series

From 4 x 4 to32 x32 matrix, expandable by increments of 4 inputs and 4 outputs

3600 Series

From 4 x 4 to 36 x 36 matrix, expandable by increments of 4 inputs and 4 outputs

Gain

Unity

Resolution range

Up to 1080p (HDTV) or 1920x1200 (the highest resolution of the single link DVI standard) @ 48, 50, or 60 Hz

Signal type

Single-link DVI digital video signals are supported.

Digital video

RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single link DVI and HDMI [if using an optional adapter] standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video)

NOTE	The DMS DVI Series boards are not HDCP compliant.

Digital audio

Embedded audio from HDMI sources can be passed, as long as it is not HDCP encrypted content

Consumer Electronics Control (CEC)

Not supported

EDID and DDC

Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered.

HDCP

Not supported

HPD

Supports hot plug detection (HPD) of display as a pass-through signal.

Maximum data rate

4.95 Gbps (1.65 Gbps per color)

Maximum pixel clock

165 MHz

Standards

DVI 1.0

Switching speed

200 ns, max.

Video input — DMS 44 DVIand DMS 4i DVI input boards

Number/signal type

4 digital RGB single link DVI-D per input board

Connectors

4 female DVI-I (digital only) per input board

Equalization

Automatic

Input cable length

100' (30 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p; 8 bit color

NOTE	The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system.

Video output — DMS 44 DVI and DMS 4o DVI output boards

Number/signal type

4 digital RGB single link DVI-D per output board

Connectors

4 female DVI-I (digital only) per output board

Re-clocking

Automatic

Output cable length

50' (15.24 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p

Peripheral device power

250 mA per output

Optical specifications — fiber optic boards

NOTE	The I/Oboards are class1 laser products. They meet the safety regulations of IEC-60825, FDA21 CFR1040.10, and FDA21 CFR1040.11.

Number/type

4 multimode fiber optic inputs and outputs (4 Tx and 4 Rx) per I/O board

Connectors

4 or 8 LC connectors per I/O board

Operating distance

300 m (985')

NOTE	Operating distance is approximate. These are typical distances. The maximum distance may be greater than these typical numbers depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.

Nominal peak wavelength

850 nm for multimode (MM)

Transmission power

-5 dBm, typical

Maximum receiver sensitivity

-12 dBm, typical

Optical loss budget

8dB, maximum

Maximum channel data rate

6.25 Gbps

Video — fiber optic (DMS 44, DMS 4i, and DMI 4o fiber boards)

Routing

1600 Series

4 x 4 to 16 x 16 matrix, expandable by increments of 4 inputs and 4 outputs

2000 Series

4 x 4 to 20 x 20 matrix, expandable by increments of 4 inputs and 4 outputs

3200 Series

4 x 4 to 32 x 32 matrix, expandable by increments of 4 inputs and 4 outputs

3600 Series

4 x 4 to 36 x 36 matrix, expandable by increments of 4 inputs and 4 outputs

Video input — DMS 44 fiber and DMS 4i fiber input boards

NOTE	The fiber optic input boards require connection to a DFX 100 Tx transmitter.

Number/signal type

4 fiber optic, multimode (OM3 or OM4 fiber recommended)

Connectors

4 LC connectors

Input cable length

300 m (985')

NOTE	The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system.

Video output — DMS 44 fiber and DMS 4o fiber output boards

NOTE	The fiber optic output boards require connection to a DFX 100 Rx receiver.

Number/signal type

4 fiber optic, multimode (OM3 or OM 4 recommended)

Connectors

4 LC connectors per board

Output cable length

300 m (985')

Communications — switcher host ports

Serial host control port

1 bidirectional RS-232 or RS-422, rear panel 9-pin female D connector

Baud rate and protocol

9600 (default), 19200, 38400, 115200 baud, adjustable; 8 data bits, 1 stop bit, no parity

Serial control pin configurations

9-pin female D connector

RS-232

2 = Tx, 3 = Rx, 5 = Gnd

RS-422

2 = Tx-, 3 = Rx-, 5 = Gnd, 7 = Rx+, 8 = Tx+

USB control ports

1 front panel female mini USB B

USB standards

USB 2.0, low speed

Ethernet control port

1 RJ-45 female

Ethernet data rate (for network communication)

10/100Base-T, half/full duplex with autodetect

Ethernet protocol

ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP, Telnet

Ethernet default settings

Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Default gateway = 0.0.0.0
DHCP = off

Web server

Up to 200 simultaneous sessions
7.0 MB nonvolatile user memory

Program control

Extron control/configuration program for Windows ^®
Extron Simple Instruction Set (SIS ^™ )
Microsoft ^® Internet Explorer ^® ver. 6 or higher, Telnet

General

Power supply

DMS 1600

Internal: 1 or 2* (positive-negative)
Input: 100-240 VAC, 50-60 Hz
*A redundant power supply is optional.

DMS 2000

Internal: 1
Input: 100-240 VAC, 50-60 Hz

DMS 3200

Internal: 1
Input: 100-240 VAC, 50-60 Hz

DMS 3600

Internal, 2*(positive-negative)
Input: 100-240 VAC, 50-60 Hz
*A redundant power supply is standard.

Power consumption

DMS 1600

Primary power supply: 97 watts
Primary and redundant supplies: 107 watts
Measured fully loaded with (4) 4x4 I/O boards

DMS 2000

116watts
Measured fully loaded with (5) 4x4 I/O boards

DMS 3200

174watts
Measured fully loaded with (8) 4x4 I/O boards

DMS 3600

212 watts
Measured fully loaded with (9) 4x4 I/O boards

I/O boards

Temperature/humidity

Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing

Cooling

Fan, right to left (as viewed from front panel)

Thermal dissipation, full load

DMS 1600

Primary power supply: 332 BTU/hr
Primary and redundant supplies: 366 BTU/hr
Measured fully loaded with (4) 4x4 I/O boards

DMS 2000

398BTU/hr
Measured fully loaded with (5) 4x4 I/O boards

DMS 3200

596BTU/hr
Measured fully loaded with (8) 4x4 I/O boards

DMS 3600

724 BTU/hr
Measured fully loaded with (9) 4x4 I/O boards

Rack mount

Yes

Enclosure type

Metal

Enclosure dimensions

DMS 1600

7.0" H x 17.0" W x 12" D (4U high, full rack wide)
(13.3 cm H x 43.2 cm W x 30.5 cm D)
(Depth excludes connectors and buttons. Width excludes rack ears.)

DMS 2000

5.2" H x 17.0" W x 12.2" D (3U high, full rack wide)
(13.3 cm H x 43.2 cm W x 31.0 cm D)
(Depth excludes connectors and buttons. Width excludes rack ears.)

DMS 3200

8.7" H x 17.0" W x 12.2" D (5U high, full rack wide)
(22.1 cm H x 43.2 cm W x 31.0 cm D)
(Depth excludes connectors and buttons. Width excludes rack ears.)

DMS 3600

14.0" H x 17.0" W x 12.25" D (8U high, full rack wide)
(35.6cm H x 43.1 cm W x 31.1 cm D)
(Depth excludes connectors and handles. Width excludes rack ears.)

Product weight with boards installed

DMS 1600

With primary power supply only

26.9 lbs (12.2 kg)

With both primary and redundant power supplies

27.9 lbs (12.6 kg)

DMS 2000

16.4lbs (7.5 kg)

DMS 3200

27.1 lbs (12.3 kg)

DMS 3600

38.5 lbs (17.5 kg)

Shipping weight with boards installed

DMS 1600

32 lbs (15 kg)

DMS 2000

21lbs (10 kg)

DMS 3200

33lbs (15 kg)

DMS 3600

48 lbs (22 kg)

DIM weight with boards installed

USA/Canada

DMS 2000

23 lbs (11 kg)

DMS 3200

39 lbs (18 kg)

International

DMS 2000

28 lbs (13 kg)

DMS 3200

47 lbs (22 kg)

DMS 3600

52 lbs (24 kg)

Vibration

ISTA 1A in carton (International Safe Transit Association)

Regulatory compliance

Safety

CE, c-UL, UL

EMI/EMC

DMS 1600 and DMS 3600

CE, C-tick, FCC Class A, ICES, KCC, VCCI

DMS 2000 and DMS 3200

CE, C-tick, FCC Class A, ICES, VCCI

Environmental

Complies with the appropriate requirements of RoHS, WEEE

Product warranty

3 years parts and labor

NOTE	All nominal levels are at ±10%.

NOTE	Specifications are subject to change without notice.

(8.1-061914-D10)

可选附件
DMS DVI Matrix Boards	DVI Matrix Boards for DMS Series Matrix Switchers
DMS 光纤矩阵板	用于 DMS 系列矩阵切换器的单根光纤多模矩阵板

附件名称发布时间附件类型

联系我们 contact us

中国上海市松江区茸华路 686 号

4000.398766、 021-3760 1568(联系就说在DAV音视工程网上看到的)

Sales-China@Extron.com

021-3760 1566

公司概况 about us

爱思创电子（上海）有限公司（爱思创Extron中国）全球总部位于美国加州，是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、分配放大器、音频放大器、扬声器、双绞线和光纤设备、视频图像解析度转换器、视音频信号处理器、视音频流媒体产品、教室声场系统及高分辨率电缆。爱思创Extron电子提供专业视音频工程、培训、设计、演示支持。