Extron DTP DVI 301 是一组发送器和接收器，用于通过单根 CAT 5 电缆长距离传输 DVI-D 视频以及双向 RS-232 和红外信号。此外，可在第二根双绞线电缆上单独传输模拟立体声音频信号。它能够将 1920x1200 和 1080p/60 深色信号发送至 100 m 远的距离。为增加灵活性和便捷性，发送器配备了一个 DVI 缓冲环通输出，以支持本地计算机显示器。这些便于集成的特性与其小巧的外壳尺寸以及任一设备上的远程供电功能相结合，使 DTP DVI 301 非常适合在空间有限的环境中传输视频和双向控制信号。
| 可选附件 | ||
|---|---|---|
| ZipClip 200 | 用于 1/8 和 1/4 机架宽产品的安装套件 | |
| 半机架搁板系统 | 半机架宽机架搁板和附件 | |
| MBU 125 | 用于 1/4 和 1/2 机架宽、两部件式产品的薄型安装套件 | |
| RFF 系列 | 基础型机架空白面板套件 | |
Extron DTP DVI 301 是一组发送器和接收器，用于通过单根 CAT 5 电缆长距离传输 DVI-D 视频以及双向 RS-232 和红外信号。此外，可在第二根双绞线电缆上单独传输模拟立体声音频信号。它能够将 1920x1200 和 1080p/60 深色信号发送至 100 m 远的距离。为增加灵活性和便捷性，发送器配备了一个 DVI 缓冲环通输出，以支持本地计算机显示器。这些便于集成的特性与其小巧的外壳尺寸以及任一设备上的远程供电功能相结合，使 DTP DVI 301 非常适合在空间有限的环境中传输视频和双向控制信号。
特性
通过单根 CAT 5 电缆传输单链路 DVI-D 以及RS-232 和红外信号
将 1920x1200 和 1080p/60 深色信号延长至100 m 远的距离
可与标准的 CAT 5e 电缆配合使用
单独传输模拟立体声音频信号
DVI 输入环通
支持 EDID 和 HDCP 传输
发送器和接收器支持远程供电
双向 RS-232 和红外控制直通
示意图
面板图
| DTP DVI 301 Tx/Rx | |||
|
|||
|
|||
| Video | |||
|---|---|---|---|
| Maximum data rate | 6.75 Gbps (2.25 Gbps per color) | ||
| Maximum pixel clock | 165MHz | ||
| Resolution range | Up to 1920x1200 or 1080p @ 60 Hz; 8, 10, or 12 bit color depth | ||
| Formats | RGB and YCbCr digital video | ||
| Standards | DVI 1.0, HDMI | ||
| Video input and loop-through — transmitter | |||
| Number/signal type | 1 single link DVI-D (or HDMI*) input 1 single link DVI-D (or HDMI*) local loop-through |
||
| Connectors | 2 female DVI-I | ||
| Interconnection between transmitter and receiver | |||
| Connectors | 2 female RJ-45 per unit for 2 cables connecting the transmitter and receiver TP1 output transmits digital video, embedded digital audio, RS-232, IR, and remote power. TP2 output transmits analog stereo audio. |
||
| Termination standards | TIA/EIA T568A or T568B | ||
| Signal transmission distance | 330' (100 m) using CAT 5e/6/7 UTP or STP cable (24 AWG or better) | ||
| Video output — receiver | |||
| Number/signal type | 1 single link DVI-D (or HDMI*) | ||
| Connectors | 1 female DVI-I | ||
| Audio | |||
| Gain | Unbalanced output: 0 dB; balanced output +6 dB | ||
| Frequency response | 20 Hz to 20 kHz, ±0.05 dB | ||
| THD + Noise | 0.03% @ 20 Hz to 20 kHz at maximum output | ||
| S/N | >90 dB, at maximum output (15 dBu), balanced (unweighted) | ||
| Stereo channel separation | >80 dB @ 1 kHz to 20 kHz | ||
| Audio input | |||
| Number/signal type | 1 PC level stereo, unbalanced | ||
| Connectors | (1) 3.5 mm stereo jack, 2 channel; tip (L), ring (R), sleeve (ground) | ||
| Impedance | >10k ohms, DC coupled | ||
| Nominal level | -10 dBV (316 mVrms) | ||
| Maximum level | +7 dBV (unbalanced) | ||
|
|||
| Audio output | |||
| Number/signal type | 1 stereo (2 channel), balanced/unbalanced | ||
| Connectors | (1) 3.5 mm captive screw connector, 5 pole | ||
| Impedance | 50 ohms unbalanced, 100 ohms balanced | ||
| Gain error | ±0.1 dB channel to channel | ||
| Maximum level (600 ohm) | >+15 dBu, balanced | ||
| Control/remote — external device (pass-through, unidirectional or bidirectional) | |||
| Serial control port input/output | |||
| Transmitter | RS-232 via (1) 3.5 mm, 5 pole captive screw connector for RS-232 control (±5 V) (connector is shared with IR control port) | ||
| Receiver | 1 set of proprietary signals on a female RJ-45 jack | ||
| Serial control port output/input | |||
| Transmitter | 1 set of proprietary signals on a female RJ-45 jack | ||
| Receiver | RS-232 via a 3.5 mm, 3 pole captive screw connector | ||
| Baud rates | Up to 115200 baud | ||
| Protocol | Data bits = 5 - 8 Stop bits = 1 or 2 Parity = odd, even, none Flow control = XON, XOFF, none |
||
| Serial control pin configuration | 1 = Tx, 2 = Rx, 3 = GND | ||
| IR control port | (1) 3.5 mm, captive screw connector, 5 pole (connector is shared with RS-232 control port) TTL level (0 to 5 V) modulated infrared controlfrom 30 kHz up to 60 kHz |
||
| IR control pin configuration | 3 = GND, 4 = IR Tx, 5 = IR Rx | ||
| General | |||
| Power supply | External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1 A, 12 watts |
||
| Power consumption | 7.6 watts, 12 VDC, total, for both transmitter and receiver | ||
|
|||
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
| Cooling | Convection, no vents | ||
| Mounting | |||
| Rack mount | Yes, with optional 1U high rack shelf | ||
| Furniture mount | Yes, with optional under-desk mounting kit | ||
| Enclosure type | Metal | ||
| Enclosure dimensions | |||
| Transmitter | 1.0" H x 4.3" W x 3.0" D (quarter rack wide) (2.5 cm H x 10.9 cm W x7.6 cm D) (Depth excludes connectors.) |
||
| Receiver | 1.0" H x 4.3" W x 6.0" D (quarter rack wide) (2.5 cm H x 10.9 cm W x 15.2 cm D) (Depth excludes connectors.) |
||
| Product weight | |||
| Transmitter | 0.5 lbs (0.3 kg) | ||
| Receiver | 1.0 lb (0.5 kg) | ||
| Shipping weight | 3 lbs (2 kg) | ||
| Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
| Regulatory compliance | |||
| Safety | CE, c-UL, UL | ||
| EMI/EMC | CE**, C-tick, FCC Class A**, ICES, VCCI | ||
|
|||
| Warranty | 3 years parts and labor | ||
|
|||
|
|||
| (8.0-053112-D6) | |||
| 可选附件 | ||
|---|---|---|
| ZipClip 200 | 用于 1/8 和 1/4 机架宽产品的安装套件 | |
| 半机架搁板系统 | 半机架宽机架搁板和附件 | |
| MBU 125 | 用于 1/4 和 1/2 机架宽、两部件式产品的薄型安装套件 | |
| RFF 系列 | 基础型机架空白面板套件 | |
中国上海市松江区茸华路 686 号
(联系就说在DAV音视工程网上看到的)
Sales-China@Extron.com
021-3760 1566
爱思创电子（上海）有限公司（爱思创Extron中国）全球总部位于美国加州，是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、分配放大器、音频放大器、扬声器、双绞线和光纤设备、视频图像解析度转换器、视音频信号处理器、视音频流媒体产品、教室声场系统及高分辨率电缆。爱思创Extron电子提供专业视音频工程、培训、设计、演示支持。
DAV首页