PowerCage FOX Rx DVI Plus 光纤接收器是一款设计用于 PowerCage ® 1600 机箱的模块化板卡,可以通过单根光纤长距离地传输 DVI、音频和 RS-232 控制信号。其设计注重可靠性和出色的高分辨率图像性能,使用 Extron 全数字技术对分辨率高达 1920x1200 的 DVI 计算机视频图像,包括 HDTV 1080p/60 进行完美的像素对像素的传输。该接收器专门设计用于视音频系统,还包括许多便于集成的特性,如自动输入存储、RS-232 控制、内部测试图案和实时的系统监控。另外,可对多个 PowerCageFOXRxDVIPlus 接收器板进行菊花链式连接。
PowerCage FOX Rx DVI Plus 光纤接收器是一款设计用于 PowerCage ® 1600 机箱的模块化板卡,可以通过单根光纤长距离地传输 DVI、音频和 RS-232 控制信号。其设计注重可靠性和出色的高分辨率图像性能,使用 Extron 全数字技术对分辨率高达 1920x1200 的 DVI 计算机视频图像,包括 HDTV 1080p/60 进行完美的像素对像素的传输。该接收器专门设计用于视音频系统,还包括许多便于集成的特性,如自动输入存储、RS-232 控制、内部测试图案和实时的系统监控。另外,可对多个 PowerCageFOXRxDVIPlus 接收器板进行菊花链式连接。
特性
接收来自 FOX 系列发送器的光纤信号,并提供单链路 DVI-D、立体声音频和 RS-232 控制信号
全数字技术对分辨率高达 1920x1200 的信号,包括 HDTV 1080p/60 提供了像素对像素的性能
可轻松地集成到广泛的 4K 环境
设计用于 PowerCage1600 机箱的模块化、可热插拔的板卡,产品编号 # 60-978-01
菊花链功能
光纤链路丢失时的警报通知
自动输入存储
经 JITC 认证
示意图
DVI Extension
4K/60 over Four Fibers
PowerCage 1600
面板图
PowerCage™ FOX Rx DVI Plus | |||
|
|||
|
|||
|
|||
Optical fiber interconnection between transmitter and receiver | |||
---|---|---|---|
Number/type | 1 singlemode or 1 multimode fiber optic input and output per board | ||
|
|||
Connectors | 2 bidirectional LC connectors per FOX board | ||
Operating distance | |||
Singlemode | 30 km (18.75 miles) with singlemode (SM) cables with a SM board | ||
Multimode | 300 m (985') with 62.5 µm OM1 multimode (MM) cable and a MM board 1 km (3280') with 50 µm OM2 multimode (MM) cable and a MM board 2 km (6561') with 50 µm OM3/OM4 2000 MHz bandwidth laser optimizedMM cable and a MM board |
||
|
|||
Nominal peak wavelength | 850 nm for multimode (MM), 1310 nm for singlemode (SM) | ||
Transmission power, singlemode or multimode | -5 dBm, typical | ||
Maximum receiver sensitivity | |||
Singlemode | -18 dBm, typical | ||
Multimode | -12 dBm, typical | ||
Optical loss budget | |||
Singlemode | 13 dB, maximum | ||
Multimode | 7 dB, maximum | ||
Maximum channel data rate | 4.25 Gbps | ||
Video | |||
Resolution range | 640x480 up to 1920x1200 @ 60Hz, including 480p, 576p, 720p, 1080i, 1080p @ 60Hz, sampled pixel for pixel; higher resolution 2K (2048x1080) @ 60 Hz, undersampled | ||
Format | RGB | ||
Standards | DVI 1.0, HDMI | ||
Video output | |||
Number/signal type | 1 single link DVI-D (or HDMI*) | ||
Connector | 1 female DVI-I | ||
Nominal level | 0.8 Vp-p | ||
Video delay | 1-2 frames | ||
Audio | |||
|
|||
Gain | |||
Range | Adjustable, -18 dB to +10 dB | ||
Default | Unbalanced output: -6 dB; balanced output: 0 dB | ||
Frequency response | 20 Hz to 20 kHz, ±0.5 dB | ||
THD + Noise | 0.10% @ 1 kHz at nominal level | ||
S/N | >80 dB at maximum output (unweighted) | ||
CMRR | 65 dB @ 20 Hz to 20 kHz | ||
Audio bits per sample | 18 bits per channel, 2 channels (L, R) | ||
Sampling rate | 48 kHz | ||
Audio output | |||
Number/signal type | 1 stereo, balanced/unbalanced or 2 mono, balanced/unbalanced |
||
Connectors | (1) 3.5 mm captive screw connector, 5 pole | ||
Impedance | 50 ohms unbalanced, 100 ohms balanced | ||
Nominal level | +4 dBu (1.23 Vrms), -10 dBV (316 mVrms) | ||
Maximum level (Hi-Z) | +7.6 dBu, unbalanced at 1% THD+N | ||
Maximum level (600 ohm) | >+6.3 dBu, unbalanced at 1% THD+N | ||
Audio delay | 1.5 frames | ||
Control/remote | |||
Serial control ports | |||
Control | 1 bidirectional RS-232, 3.5 mm captive screw connector, 5 pole (uses 3 poles; shared with the alarm port) | ||
Pass-through | 1 RS-232, 3.5 mm captive screw connector, 5 pole (3 pins are used, "RS-232 Over Fiber") | ||
Baud rate and protocol | |||
Control | 9600 baud, 8 data bits, 1 stop bit, no parity | ||
Pass-through | 9600 to 115,200 baud | ||
Serial control pin configurations | |||
Captive screw connector | 1 = Tx, 2 = Rx, 3 = GND | ||
Mini stereo jack | RS-232: tip = Tx, ring = Rx, sleeve = GND | ||
Program control | Extron control/configuration program for Windows ® Extron Simple Instruction Set (SIS ™ ) |
||
General | |||
Power | Supplied by a PowerCage 1600 enclosure | ||
Power consumption | 6.18 watts | ||
Power input requirements | 12 VDC, 1.0 A, supplied by the PowerCage enclosure | ||
Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
Cooling | Enclosure: fans, front to back Boards: convection, within the PowerCage enclosure |
||
Thermal dissipation | 27.6 BTU/hr | ||
Dimensions | Each boardfits a double slot opening in a PowerCage enclosure. | ||
Product weight | 1.1 lbs (0.5 kg) | ||
Shipping weight | 2 lbs (1 kg) | ||
Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
Regulatory compliance | |||
Safety | CE, c-UL, UL | ||
EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI | ||
Environmental | Complies with the appropriate requirements of RoHS, WEEE. | ||
Product warranty | 3 years parts and labor | ||
|
|||
|
|||
(8.1-121114-D3) |
中国上海市松江区茸华路 686 号
(联系就说在DAV音视工程网上看到的)
Sales-China@Extron.com
021-3760 1566
爱思创电子(上海)有限公司(爱思创Extron中国)全球总部位于美国加州,是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、分配放大器、音频放大器、扬声器、双绞线和光纤设备、视频图像解析度转换器、视音频信号处理器、视音频流媒体产品、教室声场系统及高分辨率电缆。爱思创Extron电子提供专业视音频工程、培训、设计、演示支持。