Extron产品

我的位置：首页/ Extron产品

用于 DVI、音频和 RS-232 信号的光纤发送器

用于 DVI、音频和 RS-232 信号的光纤发送器 FOXBOX Tx DVI Plus 产品型号：FOXBOX Tx DVI Plus 产品状态：在产
产品价格：面议 品牌：爱思创EXTRON

产品介绍

产品参数

相关附件

产品图片

产品附件

　　Extron FOXBOX Tx DVI Plus 光纤发送器可通过单根光纤长距离传输 DVI、音频和 RS-232 控制信号。其设计注重可靠性和出色的高分辨率图像性能，使用 Extron 全数字技术对分辨率高达 1920x1200 的 DVI 计算机视频图像，包括 HDTV 1080p/60 进行完美的像素对像素的传输。该发送器专门设计用于视音频系统，还包括许多便于集成的特性，如 EDID 仿真模式、RS-232 控制和实时的系统监控。FOXBOXTxDVIPlus 紧凑的薄型外壳可隐蔽地安装在讲台或桌下。

快速参考
Everlast 电源 (宣传册)

相兼容的接收器
FOX II R DP 4K	用于 DisplayPort、多通道音频、RS-232 和红外信号的光纤接收器
FOXBOX Rx DVI Plus	用于 DVI、音频和 RS-232 信号的光纤接收器
FOXBOX Rx VGA	用于 VGA、音频和 RS-232 信号的光纤接收器
FOXBOX SR HDMI	用于 HDMI、音频和 RS-232 信号的光纤图像解析度转换接收器
FOXBOX Rx HDMI	用于 HDMI、音频和 RS-232 信号的光纤接收器
PowerCage 401 FOX DR HD	用于 HDMI、音频和 RS-232 信号的双光纤接收器
PowerCage FOX Rx DVI Plus	用于 DVI-D、音频和 RS-232 信号的光纤接收器
PowerCage FOX Rx HDMI	用于 HDMI、音频和 RS-232 信号的光纤接收器
PowerCage FOX SR HDMI	用于 HDMI、音频和 RS-232 信号的光纤图像解析度转换接收器

可选附件
MBD 129	Through-Desk Mount Kit for 1/4 or 1/2 Rack Width, Two-Piece Enclosures
MBU 125	用于 1/4 和 1/2 机架宽、两部件式产品的薄型安装套件
RSB 126	Basic Rack Shelf for 6" Deep Products
RSU 126	用于 6" 深产品的通用型机架搁板套件
RFF 系列	基础型机架空白面板套件
2LC OM4 MM P	LC 至 LC 激光优化多模成品光纤 – 阻燃级
2LC SM P	LC 至 LC 弯曲不敏感的单模成品光纤 – 阻燃级

　　特性

　　通过单根光纤极长距离地传输单链路 DVI-D、立体声音频和 RS-232 控制信号

　　全数字技术对分辨率高达 1920x1200 的信号，包括 HDTV 1080p/60 提供了像素对像素的性能

　　可轻松地集成到广泛的 4K 环境

　　EDID 仿真提供可选择的分辨率和刷新率，以确保可靠的操作

　　用于故障诊断和监视的实时状态 LED 指示灯

　　光纤链路丢失时的警报通知

　　经 JITC 认证

　　1"（2.5 cm）高、1/4 机架宽的金属外壳

　　随附外置 Extron Everlast™ 电源，产品编号 #70-1174-01 — 该全球通用型电源具有经验证的高可靠性和低功耗，能够降低运行成本

　　Extron Everlast 电源可享受 7 年部件及人工保修

　　注: FOXBOX 4G DVI Plus 发送器只与 FOXBOX 4G DVI Plus 接收器兼容。 FOXBOX 4G DVI Plus 不支持带 HDCP（高带宽数字内容保护）的 DVI 信号的传输

　　示意图

　　DVI Extension

　　4K/60 over Four Fibers

　　FOXBOX DVI Plus Supports Daisy Chain Configuration

Product Diagram

　　FOXBOX DVI Plus Supports 4K/60 Using Four Parallel Connections

Product Diagram

　　面板图

Panel Drawing

FOXBOX Tx-Rx DVI Plus

NOTE	The FOXBOX Tx DVI Plus transmitter is compatible only with the following receivers: FOXBOX Rx DVI Plus, PowerCage FOX Rx DVI Plus board, FOXBOX Rx HDMI, PowerCage FOX Rx HDMI board, FOXBOX SR HDMI, and PowerCage FOX SR HDMI board.

NOTE	The analog audio signals are digitized in the transmitter, sent through the fiber cable, and converted back to analog audio in the receiver.

NOTE	This transmitter and receiver are class 1 laser products. They meet the safety regulations of IEC-60825.

Optical fiber interconnection between transmitter and receiver

Number/type

1 or 2 fiber optic

NOTE	Only one fiber is required to transmit video, audio, and unidirectional data. A second fiber is required to transmit return data for bidirectional control/communication.

Connectors

2 LC connectors

Operating distance

Singlemode

30 km (18.75 miles) with singlemode (SM) cables with SM units

Multimode

300 m (985') with 62.5µm OM1 multimode (MM) cableswith MM units
1 km (3280') with 50µm OM2 multimode (MM) cables with MM units
2 km (6561') with 50 µm OM3/OM4 2000 MHz bandwidth laser optimized multimode cable with a MM units

NOTE	Operating distance is approximate.These are typical maximum distances that may vary depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.

Nominal peak wavelength

850 nm for MM, 1310 nm for SM

Data rate

4.25 Gbps

Transmission power

-5 dBm, typical

Maximum receiver sensitivity

Singlemode

-18 dBm, typical

Multimode

-12 dBm, typical

Optical loss budget

Singlemode

13 dB, maximum

Multimode

7 dB, maximum

Video

NOTE

*Appropriate DVI-D to HDMI cables or adapters are required for HDMI signal input/output. The FOXBOX DVI Plus Series can be used to distribute HDMI signals if you use a DVI-to-HDMI adapter. However, when using HDMI signals, these units do not transmit audio and CEC signals.
The FOXBOX DVI Plus does not support transmission of DVI signals with High-bandwidth Digital Content Protection (HDCP).

Resolution range

Up to 1920x1200 or 1080p @ 60 Hz pixel for pixel

Formats

RGB and YCbCr digital video

Standards

DVI 1.0, HDMI

Video input

Number/signal type

1 single link DVI-D (or HDMI*)

Connectors

1 female DVI-I

Video output

Number/signal type

1 single link DVI-D (or HDMI*)

Connectors

1 female DVI-I

Nominal level

0.8 Vp-p

Video delay

1-2 frames

Audio

Gain

Range

Adjustable, -18 dB to +10 dB

Default

Unbalanced output: 0 dB

Frequency response

20 Hz to 20 kHz, ±0.5 dB

THD + Noise

0.10% @ 1 kHz at nominal level

S/N

>80 dB at maximum output (unweighted)

Audio bits per sample

18 bits per channel, 2 channels (L, R)

Sampling rate

48 kHz

Audio input — transmitters

Number/signal type

1 unbalanced stereo or 2 unbalanced mono

Connectors

(1) 3.5 mm mini stereo jack

Impedance

18k ohms unbalanced, DC coupled

Nominal level

-10 dBV (316 mVrms)

Maximum level

+8.9 dBV, (unbalanced) at 1% THD+N

NOTE	0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu

Audio output — receivers

Number/signal type

1 unbalanced stereo or 2 unbalanced mono

Connectors

(1) 3.5 mm mini stereo jack

Impedance

50 ohms unbalanced

Nominal level

-10 dBV (316 mVrms)

Maximum level (Hi-Z)

+7.6dBu, unbalanced at 1% THD+N

Maximum level (600 ohm)

>+6.3 dBu, unbalanced at 1% THD+N

Audio delay

1.5 frames

Control/remote

Serial control ports on each unit (transmitter and receiver)

Control

1 RS-232, 2.5 mm mini stereo jack (front panel)

Pass-through

1 RS-232, 3.5 mm captive screw connector, 5-pole (3 pins are used) (rear panel)

Baud rate and protocol

Control

9600 baud, 8 data bits, 1 stop bit, no parity

Pass-through

9600 to 115,200 baud

Serial control pin configuration

Mini stereo jack: tip = Tx, ring = Rx, sleeve = GND

Program control

Extron control/configuration program for Windows ^®
Extron Simple Instruction Set (SIS ^™ )

General

Power supply

External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1.5 A, 18 watts

Power input requirements

12 VDC,0.6 A

Temperature/humidity

Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing

Cooling

Convection, vents on top and side panels

Thermal dissipation

Transmitter

4.0 BTU/hr

Receiver

3.9 BTU/hr

Mounting

Rack mount

Yes, with optional rack shelf

Furniture mount

Yes, with optional under desk mounting kit

Enclosure type

Metal

Enclosure dimensions

1.0" H x 4.3" W x 6.0" D (quarter rack wide)
(2.5cm H x10.9 cm W x 15.2 cm D)
(Depth excludes connectors.)

Product weight

0.7 lbs (0.3 kg) per unit, 1.4 lbs (0.6 kg) per pair

Regulatory compliance

CE, c-UL UL, CE, C-tick, FCC Class A, ICES, VCCI,
Complies with the appropriate requirements of RoHS, WEEE

Product warranty

3 years parts and labor

Everlast power supply warranty

7 years parts and labor

NOTE	All nominal levels are at ±10%.

NOTE	Specifications are subject to change without notice.

(4399-101518-D10)

可选附件
MBD 129	Through-Desk Mount Kit for 1/4 or 1/2 Rack Width, Two-Piece Enclosures
MBU 125	用于 1/4 和 1/2 机架宽、两部件式产品的薄型安装套件
RSB 126	Basic Rack Shelf for 6" Deep Products
RSU 126	用于 6" 深产品的通用型机架搁板套件
RFF 系列	基础型机架空白面板套件
2LC OM4 MM P	LC 至 LC 激光优化多模成品光纤 – 阻燃级
2LC SM P	LC 至 LC 弯曲不敏感的单模成品光纤 – 阻燃级

附件名称发布时间附件类型

联系我们 contact us

中国上海市松江区茸华路 686 号

4000.398766、 021-3760 1568(联系就说在DAV音视工程网上看到的)

Sales-China@Extron.com

021-3760 1566

公司概况 about us

爱思创电子（上海）有限公司（爱思创Extron中国）全球总部位于美国加州，是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、分配放大器、音频放大器、扬声器、双绞线和光纤设备、视频图像解析度转换器、视音频信号处理器、视音频流媒体产品、教室声场系统及高分辨率电缆。爱思创Extron电子提供专业视音频工程、培训、设计、演示支持。