Extron IN1608 是一款符合 HDCP 标准的图像解析度转换演示切换器，具有 4 路 HDMI 输入、2 路通用模拟视频输入以及 2 路 Extron DTP ® 输入。它包括双路 HDMI 输出、1 路 DTP 输出、一个集成的D 类音频功率放大器和一个用于完整视音频系统控制的内置 IPCPPro350 控制处理器。DTP 输入和输出与 DTP终端设备配合工作，用于延长视频、音频和双向控制信号。每个 DTP 发送器/接收器链路仅需要一根 CATx 屏蔽电缆。IN1608 通过快速而可靠的信号源切换，可轻松地支持本地及远端信号源和显示设备，并且使用高性能的图像解析度转换引擎将 HDMI 和模拟信号源进行转换。IN1608 还包括一系列音频切换和处理特性。部分型号提供一路兼容 HDBaseT 的输出。
| 相兼容的发送器 | ||
|---|---|---|
| DTP2 T 211 | 带音频加嵌功能的 4K/60 HDMI DTP2 发送器 | |
| DTP2 T 212 | 集成 DTP2 发送器和 HDMI 输出的 2 路输入 4K/60 HDMI 切换器 | |
| DTP DVI 4K 230 D Tx | 用于 DVI 信号的 DTP 发送器 - Decorator 型墙面板 | |
| DTP DVI 4K 230 Tx | 用于 DVI 信号的 DTP 发送器 | |
| DTP DVI 4K 330 Tx | 用于 DVI 信号的长距离 DTP 发送器 | |
| DTP HD DA 4K 230 | 4 路和 8 路输出 DTP 分配放大器 | |
| DTP HD DA 4K 330 | 长距离 4 路和 8 路输出 DTP 分配放大器 | |
| DTP HDMI 4K 230 Tx | 用于 HDMI 信号的 DTP 发送器 | |
| DTP HDMI 4K 330 Tx | 用于 HDMI 信号的长距离 DTP 发送器 | |
| DTP T 3G-SDI 230 D | 用于 3G-SDI 信号的 DTP 发送器 - Decorator 型墙面板 | |
| DTP T DP 4K 230 | 用于 DisplayPort 信号的 DTP 发送器 | |
| DTP T DP 4K 330 | 用于 DisplayPort 信号的长距离 DTP 发送器 | |
| DTP T DSW 4K 233 | 集成 DTP 发送器和音频加嵌功能的 3 路输入多格式切换器 | |
| DTP T DSW 4K 333 | 集成长距离 DTP 发送器和音频加嵌功能的 3 路输入多格式切换器 | |
| DTP T DWP 4K 232 D | 用于 DisplayPort 和 HDMI 信号并带音频加嵌功能的 2 路输入 DTP 发送器 - Decorator 型墙面板 | |
| DTP T EU 232 | 用于欧式接线盒并带音频加嵌功能的 2 路输入 DTP 发送器 | |
| DTP T EU 4K 231 | 用于 Flex55 和欧式接线盒的 DTP 发送器 | |
| DTP T EU 4K 331 | 用于 Flex55 和欧式接线盒的长距离 DTP 发送器 | |
| DTP T FB 232 | 用于地插盒并带音频加嵌功能的 2 路输入 DTP 发送器 | |
| DTP T FB 332 | 用于地插盒并带音频加嵌功能的长距离 2 路输入 DTP 发送器 | |
| DTP T HD2 4K 230 | 用于 HDMI 信号并带输入环通的 DTP 发送器 | |
| DTP T HD2 4K 330 | 用于 HDMI 信号并带输入环通的长距离 DTP 发送器 | |
| DTP T HWP 4K 231 D | 用于 HDMI 信号的 DTP 发送器 - Decorator 型墙面板 | |
| DTP T HWP 4K 331 D | 用于 HDMI 信号的长距离 DTP 发送器 - Decorator 型墙面板 | |
| DTP T MK 232 | 用于 MK 接线盒并带音频加嵌功能的 2 路输入 DTP 发送器 | |
| DTP T MK 4K 231 | 用于 MK 接线盒的 DTP 发送器 | |
| DTP T MK 4K 331 | 用于 MK 接线盒的长距离 DTP 发送器 | |
| DTP T SW4 HD 4K | 集成 DTP 发送器的 4 路输入 HDMI 切换器 | |
| DTP T USW 233 | 集成 DTP 发送器和音频加嵌功能的 3 路输入切换器 | |
| DTP T USW 333 | 集成长距离 DTP 发送器和音频加嵌功能的 3 路输入切换器 | |
| DTP T UWP 4K 232 D | 用于 HDMI 和 VGA 信号并带音频加嵌功能的 2 路输入 DTP 发送器 - Decorator 型墙面板 | |
| DTP T UWP 4K 332 D | 用于 HDMI 和 VGA 信号并带音频加嵌功能的长距离 2 路输入 DTP 发送器 - Decorator 型墙面板 | |
| 相兼容的接收器 | ||
|---|---|---|
| DTP2 R 211 | 带音频解嵌功能的 4K/60 HDMI DTP2 接收器 | |
| DTP2 R 212 | 带音频解嵌功能的 4K/60 HDMI DTP2 接收器和切换器 | |
| DTP DVI 4K 230 D Rx | 用于 DVI 信号的 DTP 接收器 - Decorator 型墙面板 | |
| DTP DVI 4K 230 Rx | 用于 DVI 信号的 DTP 接收器 | |
| DTP DVI 4K 330 Rx | 用于 DVI 信号的长距离 DTP 接收器 | |
| DTP HDMI 4K 230 Rx | 用于 HDMI 信号的 DTP 接收器 | |
| DTP HDMI 4K 330 Rx | 用于 HDMI 信号的长距离 DTP 接收器 | |
| DTP R DP 4K 330 | 用于 DisplayPort 信号的长距离 DTP 接收器 | |
| DTP R HWP 4K 231 D | 用于 HDMI 信号的 DTP 接收器 - Decorator 型墙面板 | |
| DTP R HWP 4K 331 D | 用于 HDMI 信号的长距离 DTP 接收器 - Decorator 型墙面板 | |
| 兼容的用户界面 | ||
|---|---|---|
| CCI Pro 700 | TouchLink Pro 会议室控制界面 | |
| TLI Pro 101 | Touchlink 接口 | |
| TLP Pro 320C | 3.5" Cable Cubby 专用 TouchLink Pro 触摸屏 | |
| TLP Pro 320M | 3.5" 墙面安装型 TouchLink Pro 触摸屏 | |
| TLP Pro 725T | 7" 桌面型 TouchLink Pro 触摸屏 | |
| TLP Pro 1022T | 10" 桌面型 TouchLink Pro 触摸屏 | |
| TLP Pro 1220MG | 12" 墙面安装型 TouchLink Pro 触摸屏 | |
| TLP Pro 1220TG | 12" 桌面型 TouchLink Pro 触摸屏 | |
| TLP Pro 1520MG | 15" 墙面安装型 TouchLink Pro 触摸屏 | |
| TLP Pro 1520TG | 15" 桌面型 TouchLink Pro 触摸屏 | |
| TLP Pro 1720MG | 17" 墙面安装型 TouchLink Pro 触摸屏 | |
| TLP Pro 1720TG | 17" 桌面型 TouchLink Pro 触摸屏 | |
| 兼容的按键面板 | ||
|---|---|---|
| EBP 1200C | 带 eBUS 按键面板的 Cable Cubby 接线盒 | |
| EBP 100 | 带 6 个按键的 eBUS 按键面板 – 美式 2 单元 | |
| EBP 200 | 带 10 个按键的 eBUS 按键面板 – 美式 3 单元 | |
| EBP 105 D | 带 5 个按键的 eBUS 按键面板 – Decorator 型墙面板 | |
| EBP 105 EU | 带 5 个按键的 eBUS 按键面板 – Flex55 和欧式 | |
| EBP 105 MK | 带 5 个按键的 eBUS 按键面板 – MK | |
| EBP 105P EU | 带 5 个按键的 eBUS 按键面板 – Flex55 和欧式 | |
| EBP 105P MK | 带 5 个按键的 eBUS 按键面板 – MK | |
| EBP 106 D | 带 6 个按键的 eBUS 按键面板 – Decorator 型墙面板 | |
| EBP 106 EU | 带 6 个按键的 eBUS 按键面板 – Flex55 和欧式 | |
| EBP 106 MK | 带 6 个按键的 eBUS 按键面板 – MK | |
| EBP 106P D | 带 6 个按键的 eBUS 按键面板 - Decorator 型墙面板 | |
| EBP 108 D | 带 8 个按键的 eBUS 按键面板 - Decorator 型墙面板 | |
| EBP 108 EU | 带 8 个按键的 eBUS 按键面板 – Flex55 和欧式 | |
| EBP 108 MK | 带 8 个按键的 eBUS 按键面板 – MK | |
| EBP 110 D | 带 10 个按键的 eBUS 按键面板 - Decorator 型墙面板 | |
| EBP 110 EU | 带 10 个按键的 eBUS 按键面板 – Flex55 和欧式 | |
| EBP 110 MK | 带 10 个按键的 eBUS 按键面板 – MK | |
| EBP 111 D | 带 11 个按键的 eBUS 按键面板 - Decorator 型 2 单元 | |
| EBP VC1 D | 带音量控制的 eBUS 按键面板 - Decorator 型墙面板 | |
| EBP VC1 EU | 带音量控制的 eBUS 按键面板 - Flex55 和欧式 | |
| EBP VC2 D | 带双音量控制的 eBUS 按键面板 - Decorator 型墙面板 | |
| EBP VC2 EU | 带双音量控制的 eBUS 按键面板 - Flex55 和欧式 | |
| EBP VC2 MK | 带双音量控制的 eBUS 按键面板 - MK | |
| EBP NAV D | 带动画播放控制的 eBUS 按键面板 - Decorator 型墙面板 | |
| EBP NAV EU | 带动画播放控制的 eBUS 按键面板 - Flex55 和欧式 | |
| 随附附件 | ||
|---|---|---|
| MBD 149 | 1U, Full Rack Width, Rack Mount and Through-Desk Kit for Four-Piece Enclosure | 70-077-03 |
| 可选附件 | ||
|---|---|---|
| HDMI Ultra 系列 | 超柔韧极高速 HDMI 电缆 | |
| XTP DTP 24 | 用于 XTP Systems 和 DTP Systems 的屏蔽双绞线电缆 | |
| XTP DTP 24 耦合器 | 用于 Extron XTP DTP 24 屏蔽双绞线电缆的屏蔽 RJ-45 耦合器 | |
| XTP DTP 24 插头 | 用于 Extron XTP DTP 24 屏蔽双绞线电缆的屏蔽 RJ-45 插头套件 | |
| XTP DTP 24 打线式插座 | 用于 Extron XTP DTP 24 屏蔽双绞线电缆的屏蔽 RJ-45 打线式插座套件 | |
| CTU 45 | 通用型 RJ-45 端接工具 | |
| 安装故事 |
|---|
| Extron AV Switching and Control Systems Help Logan City School District Reinvent Learning Extron AV Switching and Control Systems Help Logan City School District Reinvent Learning Logan High School is a four-year public high school in Logan, Utah, with an enrollment of approximately 1,730 students... |
| University of Scranton Standardizes Campus AV with Extron The University of Scranton in Pennsylvania is a private Catholic and Jesuit university founded in 1888, with a student body of approximately 5,400 undergraduates and graduates. It offer... |
| Extron Technology Enables Education and Collaboration at Cal Poly’s Collins College Cal Poly University’s Collins College of Hospitality Management – CCHM is the largest in the state. To support its burgeoning enrollment, CCHM recently built the LEED Gold-certified Building 80, named the Marriott Learning Center, on their campus in Pomona, California... |
| FirstService Residential Chooses State of the Art Extron Pro Series Control FirstService Residential in Irvine, California is an industry-leading HOA and community management company. In 2012, FirstService decided to merge two of its offices and create a ne... |
Extron IN1608 是一款符合 HDCP 标准的图像解析度转换演示切换器，具有 4 路 HDMI 输入、2 路通用模拟视频输入以及 2 路 Extron DTP ® 输入。它包括双路 HDMI 输出、1 路 DTP 输出、一个集成的D 类音频功率放大器和一个用于完整视音频系统控制的内置 IPCPPro350 控制处理器。DTP 输入和输出与 DTP终端设备配合工作，用于延长视频、音频和双向控制信号。每个 DTP 发送器/接收器链路仅需要一根 CATx 屏蔽电缆。IN1608 通过快速而可靠的信号源切换，可轻松地支持本地及远端信号源和显示设备，并且使用高性能的图像解析度转换引擎将 HDMI 和模拟信号源进行转换。IN1608 还包括一系列音频切换和处理特性。部分型号提供一路兼容 HDBaseT 的输出。
特性
将 HDMI、模拟视频和音频信号源集成到演示系统中
2 路 DTP 输入、4 路 HDMI 输入和 2 路通用模拟视频输入
3 路视频同时输出
集成的 DTP 输入和输出可通过单根 CATx 屏蔽电缆将视频、控制和模拟音频信号传输至 100 m (330') 远的距离
内置 IPCPPro350 控制处理器
提供了节能的 D 类立体声或单声道功率放大器型号： 2 x 50W, 4Ω; 2 x 25W, 8Ω 1 x 100W, 70V
经 JITC 认证
示意图
Videoconferencing
Conference Room
HDBaseT Connection
IN1608 IPCP MA 70 – Videoconferencing
Built-in control processor works with TouchLink Pro touchpanel to enable user control. Local video sources along with guest devices connected over DTP extension are scaled to a common output resolution. 70 V amplifier and speakers provide speech reinforcement.
IN1608 - Conference Room Application
Source switching and scaling, DTP extension to wall and table locations for connecting devices, and mixing for mics and program audio
IN1608 IPCP SA HDBT - Collaborative Learning
Centralized control, source switching and signal optimization, DTP extension to student device locations and HDbaseT output connected directly to an HDbaseT-enabled projector. Audio mixing and processing with stereo amplification for program reinforcement
面板图
| IN1608 Series | |||
| Video input | |||
|---|---|---|---|
| Number/signal type | |||
| Local inputs (all models) | 2 RGB, RGBcvS, component video (YUVi/YUVp/HDTV), S-video, composite 4 HDMI/DVI (HDCP compliant) |
||
| Remote inputs | 2 DTP 230 (HDCP compliant) (60-1238-0x only) 2 DTP 330 (HDCP compliant) (all other models) |
||
| Connectors | 2 female 15-pin HD 4 female HDMI type A 2 female RJ-45 connectors |
||
| HDMI equalization | Automatic | ||
| HDMI input cable length | Up to 75' (22.9 m) for all supported input rates | ||
| Nominal level | 1 Vp-p for Y of component video and S-video, and for composite 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video |
||
| Minimum/maximum levels | Analog: 0.0 V to 1.0 Vp-p with no offset at unity gain | ||
| Impedance | 75 ohms | ||
| Horizontal frequency | 15 kHz to 100 kHz | ||
| Vertical frequency | 24 Hz to 75 Hz | ||
| Resolution range | 640x480 to 1600x1200 and 1920x1200* NTSC, PAL, SECAM, 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, and 2K *reduced blanking |
||
| Return loss | >30 dB @ 5 MHz | ||
| DC offset (max. allowable) | 1.5 V | ||
| Video processing | |||
| Decoder | 12 bit digital (3D-adaptive comb filter) | ||
| Analog sampling | 12 bits per color; 13.5 MHz standard (video) 170 MHz standard (RGB) | ||
| Digital pixel data bit depth | 8, 10, or 12 bits per channel; 165 MHz pixel clock (HDMI) | ||
| Colors | 1 billion (10 bit processing) | ||
| Video output | |||
| Number/signal type | |||
| Local outputs (all models) | 2 HDMI/DVI (HDCP compliant) | ||
| Remote output | 1 DTP 230 (HDCP compliant) (60-1238-0x only) 1 DTP 330 (HDCP compliant) (60-1238-1x, 60-1238-5xonly) 1 HDBT (HDCP compliant) (60-1238-7x only) |
||
| Connectors | 2 female HDMI 1 female RJ-45 connector |
||
| HDMI peripheral device power | 200 mA per output | ||
| Scaled resolution | 640x480 6,8,9 , 800x600 6,8,9 , 852x480 6,8,9 , 1024x768 6,8,9 , 1024x852 6,8,9 , 1024x1024 6,8,9 , 1280x768 6,8,9 , 1280x800 6,8,9 , 1280x1024 6,8,9 , 1360x765 6,8,9 , 1360x768 6,8,9 , 1365x768 6,8,9 , 1365x1024 6,8,9 , 1366x768 6,8,9 , 1400x1050 6,8 , 1440x900 6,8,9 , 1600x900 6,8 , 1600x1200 6,8 , 1680x1050 6,8 , 1920x1200 6,8 HDTV 480p 7,8 , 576p 6 , 720p 3,4,5,6,7,8 , 1080i 6,7,8 , 1080p 1,2,3,4,5,6,7,8 , 2048x1080 1,2,3,4,5,6,7,8 1 = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz, 4 = at 29.97 Hz, 5 = at 30 Hz, 6 = at 50 Hz, 7 = at 59.94 Hz, 8 = at 60 Hz, 9 = at 75 Hz |
||
| Sync | |||
| Input type | RGBHV, RGBS, RGsB, RGBcvS, bi-level or tri-level component video | ||
| Input standards | NTSC 3.58, NTSC 4.43, PAL, SECAM | ||
| Input level | 2.75 V to 5.0 Vp-p for RGBHV or RGBS 0.6 Vp-p for component video with tri-level sync 0.3 Vp-p for component video with bi-level sync or RGsB |
||
| Input impedance | Horizontal: 510 ohms Vertical: 510 ohms |
||
| Max. input voltage | 5.0 Vp-p | ||
| Shielded twisted pair interconnection | |||
| Connectors | 3 female RJ-45 | ||
| Termination standard | TIA/EIA-T568B | ||
| Signal transmission distance | |||
| DTP 330 | Up to 330' (100 m) using shielded twisted pair cable or XTP DTP 24 STP cable | ||
| HDBaseT | Up to 330' (100 m) using shielded twisted pair cable or XTP DTP 24 STP cable | ||
| DTP 230 | Up to 230' (70 m) using shielded twisted pair cable or XTP DTP 24 STP cable | ||
| Cable requirements | Solid conductor, 24 AWG or better | ||
| Cable recommendations | 400 MHz bandwidth, STP (shielded twisted pair) | ||
|
|||
|
|||
| Audio | |||
| Gain | Unbalanced output: -6 dB; balanced output: 0 dB | ||
| Frequency response | 20 Hz to 20k Hz, ±0.5 dB | ||
| THD + Noise | <0.1%, 20 Hz to 20k Hz at nominal level | ||
| S/N | >90 dB at maximum balanced output (unweighted) | ||
| Crosstalk | ≤-80 dB @ 1 kHz, fully loaded | ||
| Stereo channel separation | >80 dB @ 1 kHz | ||
| Bass | +12 dB to -24 dB @ 100 Hz | ||
| Treble | +12 dB to -24 dB @ 8 kHz | ||
| Audio input | |||
| Number/signal type | 8 stereo line level balanced or unbalanced 2 mono mic/line level balanced or unbalanced (with available phantom power) 4 stereo, de-embedded from HDMI (PCM only) 2 DTP (de-embedded from HDMI [PCM only], or remote balanced/unbalanced, analog) |
||
| Connectors | (6) 3.5 mm captive screw connectors, 5 pole for line (2) 3.5 mm captive screw connectors, 3 pole for mic/line 4 female HDMI type A 2 female RJ-45 connectors |
||
| Impedance | >10k ohms unbalanced, >20k ohms balanced | ||
| Nominal level | Line inputs: +4 dBu, -10 dBV, adjustable Mic/line inputs: -60 dBV, +4 dBu, -10 dBV, adjustable |
||
| Maximum level | +21 dBu at rated THD+N when input gain is set to 0 dB | ||
| CMRR | >80 dB @ 1 kHz | ||
| Input gain adjustment | Line inputs: -18 dB to +24 dB, 1 dB steps, adjustable per input Mic/line inputs: -18 dB to +60 dB, 1 dB steps, adjustable per input LPCM-2Ch: -18 dB to +24 dB, 0.1 dB steps, adjustable per input |
||
|
|||
| DC phantom power | +48 VDC ±10% (can be switched on or off per mic/line input) | ||
| Audio output | |||
| Number/signal type | |||
| Local outputs (all models) | 1 balanced or unbalanced stereo (variable) 1 balanced or unbalanced stereo; can be configured as stereo or two independently mixed mono channels 2 HDMI embedded |
||
| Remote output | 1 DTP (embedded digital, and remote balanced/unbalanced analog) (60-1238-0x, 60-1238-1x, 60-1238-5xonly) 1 HDBT (embedded digital) (60-1238-7x only) |
||
| Connectors | (2) 3.5 mm captive screw connectors, 5 pole 2 female HDMI 1 RJ-45 connector |
||
| Impedance | 50 ohms unbalanced, 100 ohms balanced | ||
| Gain error | ±0.5 dB channel to channel | ||
| Maximum level (Hi-Z) | >+20 dBu, balanced; >+14 dBu, unbalanced | ||
| Output volume range | 0 to -100 dB in 1 dB steps | ||
|
|||
| Audio output — power amplifier (MA and SA models only) | |||
| Number/signal type | |||
| Stereo models | 1 stereo (default) or 2 mono (2 channels total) | ||
| Mono models | 1 mono, 70 V line | ||
| Connectors | |||
|
|||
| Stereo models | (1) 5 mm screw lock captive screw connector, 4 pole | ||
| Mono models | (1) 5 mm screw lock captive screw connector, 2 pole | ||
| Load impedance | |||
| Stereo models | 4 ohms minimum | ||
| Mono models | 50 ohms minimum | ||
| High pass filter — MA models only | 100 Hz, 12 dB/octave roll off | ||
| Frequency response | |||
| Stereo models | 20 Hz to 20 kHz,-3 dB to+1 dB @ 1 W | ||
| Mono models | 100 Hz to 20 kHz, -3 dB to +1 dB @ 1 W | ||
| THD + Noise | <0.1% @ 1 kHz, 3 dB below clipping | ||
| S/N | >90 dB, 20 Hz to 20 kHz, unweighted | ||
| Amplifier type | Class D | ||
| Output power | |||
| Stereo models | 25 watts per channel, 8 ohms, 1 kHz, 0.1% THD 50 watts per channel, 4 ohms, 1 kHz, 0.1% THD |
||
| Mono models | 100 watts (rms) @ 70 V, 1 kHz, 0.1% THD | ||
| Protection | Clip limiting, thermal, short circuit, DC output | ||
| Communications — scaling presentation switcher | |||
| Serial control port | 1 bidirectional RS-232, 3.5 mm captive screw connector, 3 pole (rear panel) | ||
| Baud rate and protocol | 9600, 8 data bits, 1 stop bit, no parity (default) | ||
| Serial control pin configuration | 1 = Tx, 2 = Rx, 3 = Gnd | ||
| USB control port | 1 front panel female mini USB B | ||
| USB standards | USB 2.0, high speed | ||
| All models except IPCP models | |||
| Ethernet control port | 1 female RJ-45 connector | ||
| Ethernet data rate | 10/100Base-T, half/full duplex with autodetect | ||
| Ethernet protocol | ARP, ICMP (ping), IP, TCP, DHCP, HTTP, Telnet | ||
| Ethernet default settings | Link speed and duplex level = autodetected IP address = 192.168.254.254 Subnet mask = 255.255.0.0 Gateway = 0.0.0.0 DHCP = off |
||
| Program control | Extron control/configuration program for Windows® Extron Simple Instruction Set (SIS ™ ) Microsoft® Internet Explorer® |
||
| Communications — external device (pass-through, unidirectional or bidirectional) (RS-232/IR over DTP or RS-232/IR over HDBT) | |||
|
|||
| Serial control pass-through ports | |||
| IN1608 input/DTP Tx | RS-232 via (2) 3.5 mm, 5 pole captive screw connectors (shared with IR ports) | ||
| IN1608 output/TP Rx | RS-232 via (1) 3.5 mm, 5 pole captive screw connector (shared with IR port) | ||
| Baud rates | Up to 115200 baud | ||
| Protocol | 6 - 8 data bits 1 or 2 stop bits no parity (default) even or odd parity flow control = XON, XOFF, none |
||
| Serial control pin configuration | 1 = Tx, 2 = Rx, 3 = Gnd | ||
| IR pass-through control ports | TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz | ||
| IN1608 input/DTP Tx | (2) 3.5 mm captive screw connectors, 5 pole (shared with RS-232 ports) | ||
| IN1608 output/TP Rx | (1) 3.5 mm captive screw connector, 5 pole (shared with RS-232 port) | ||
| IR control pin configuration | 3 = Gnd, 4 = IR Tx, 5 = IR Rx | ||
| Communications — IPCP Pro 350 control processor — IPCP models only | |||
| Memory | |||
| SDRAM | 512 MB | ||
| Flash | 4.5 GB | ||
| Software and control options | |||
| Software | Extron Global Configurator Plus and Professional for Windows® | ||
| Control options | GlobalViewer®, TouchLink® for Web, TouchLink for iPad®, or TouchLink Pro touchpanels | ||
| Ethernet control | |||
| Network interface controllers (NICs) | 1 | ||
| Network switch | 1 unmanaged 3 port switch | ||
| Connectors | 3 female RJ-45 connectors | ||
| Data rate | 10/100/1000Base-T, half/full duplex with autodetect | ||
| Protocols | DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP | ||
| Default settings | Link speed and duplex level = autodetected IP address = 192.168.254.250 Subnet mask = 255.255.255.0 Gateway = 0.0.0.0 DHCP = off DNS: 127.0.0.1 |
||
| Serial control | |||
| Quantity/type | 1 bidirectional RS-232, RS-422, RS-485 (port 1) 2 bidirectional RS-232 (ports 2 and 3) |
||
| Connectors | (1) 3.5 mm captive screw connector, 5 pole (2) 3.5 mm captive screw connectors, 3 pole |
||
| Baud rate and protocol | 300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits; no parity (default), even, odd, mark, or space parity |
||
|
|||
| Pin configurations, serial, 5-pole captive screw | |||
| RS-232 (default) | Pin 1 = Tx, 2 = Rx, 3 = Gnd, 4 = RTS, 5 = CTS | ||
| RS-422 | Pin 1 = Tx-, 2 = Rx-, 3 = Gnd, 4 = Tx+, 5 = Rx+ | ||
| RS-485 | Pins 1 and 2 (tied together) = data-, 3 = Gnd, 4 and 5 (tied together) = data+ | ||
| Pin configurations, serial, 3-pole captive screw | Pin 1 = Tx, 2 = Rx, 3 = Gnd | ||
| Digital I/O control | |||
| Quantity/type | 4 digital input/output (configurable) | ||
| Connectors | (1) 3.5 mm captive screw connector, 5 pole | ||
| Digital inputs | |||
| Input voltage range | 0 to 24 VDC, clamped at +30 VDC | ||
| Input impedance | 29k ohms | ||
| Programmable pullup | 1k ohms to +5 VDC | ||
| Threshold low to high | >2.8 VDC | ||
| Threshold high to low | <2.0 VDC | ||
| Digital outputs | 250 mA sink from 24 VDC max. | ||
| Pin configurations | 1, 2, 3, 4 = digital I/Os 1, 2, 3, 4; 5 = Gnd | ||
| IR/serial control | |||
| Quantity/type | 2 programmable: unidirectional RS-232 (±5 V), or TTL level (0 to 5 V) infrared (carrier and non-carrier) up to 300 kHz | ||
| Connector | (1) 3.5 mm captive screw connector, 5-pole | ||
| Baud rate and protocol (RS-232) | 300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits; no parity (default), even, odd, mark, or space parity |
||
| Pin configurations | For each port, pin 1= signal, 2 = Gnd | ||
| IR output carrier frequency | 30 kHz to 300 kHz | ||
| Relay control | |||
| Quantity/type | 4 normally open relays | ||
| Relay control connectors | (1) 3.5 mm captive screw connector, 6 pole | ||
| Relay control contact rating | 24 VDC, 1 A | ||
| General | |||
| Power supply | Internal Input: 100-240 VAC, 50-60 Hz |
||
| Power consumption | |||
| Full load (amp output at 1/8 power) | |||
| IN1608, IN1608 HDBT | 44 watts | ||
| All amplifier models except IPCP models | 67 watts | ||
| All IPCP models | 77 watts | ||
| Power save mode | |||
| IN1608, IN1608 HDBT | <36 watts | ||
| All amplifier models except IPCP models | <43 watts | ||
| All IPCP models | <55 watts | ||
| Remote power capability | |||
| All HDBT models | Supports up to two endpoints (two DTP Tx) | ||
| All other models | Supports up to three endpoints (two DTP Tx, one DTP Rx) | ||
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
| Cooling | Fans, air flows right to left (as viewed from front panel) | ||
| Fan noise | <37 dB(A) at 1 m | ||
| Thermal dissipation | |||
| Full load (amp output at 1/8 power) | |||
| IN1608, IN1608 HDBT | 108 BTU/hr | ||
| All amplifier models except IPCP models | 147 BTU/hr | ||
| All IPCP models | 161 BTU/hr | ||
| Power save mode | |||
| IN1608, IN1608 HDBT | <86BTU/hr | ||
| All amplifier models except IPCP models | <111 BTU/hr | ||
| All IPCP models | <129 BTU/hr | ||
| Mounting | |||
| Rack mount | Yes, with included, pre-installed brackets | ||
| Enclosure type | Metal | ||
| Enclosure dimensions | |||
| IN1608, IN1608 HDBT | 1.72" H x 17.5" W x 9.5" D (1U high, full rack wide) (4.4 cm H x 44.4 cm W x 24.1 cm D) (Depth excludes connectors and knobs. Width excludes rack ears.) |
||
| All other models | 3.47" H x 17.5" W x 9.5" D (2U high, full rack wide) (8.8 cm H x44.4 cm W x 24.1 cm D) (Depth excludes connectors and knobs. Width excludes rack ears.) |
||
| Product weight | |||
| IN1608, IN1608 HDBT | 5.0 lbs (2.3 kg) | ||
| All amplifier models except IPCP models | 7.4 lbs (3.4 kg) | ||
| All IPCP models | 7.9 lbs (3.6 kg) | ||
| Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
| Regulatory compliance | |||
| Safety | CE, c-UL, UL | ||
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI | ||
| Environmental | Complies with the appropriate requirements of RoHS, WEEE. | ||
| Product warranty | 3 years parts and labor | ||
| Everlast power supply warranty | 7 years parts and labor | ||
|
|||
|
|||
| (4134-D13) | |||
| 可选附件 | ||
|---|---|---|
| HDMI Ultra 系列 | 超柔韧极高速 HDMI 电缆 | |
| XTP DTP 24 | 用于 XTP Systems 和 DTP Systems 的屏蔽双绞线电缆 | |
| XTP DTP 24 耦合器 | 用于 Extron XTP DTP 24 屏蔽双绞线电缆的屏蔽 RJ-45 耦合器 | |
| XTP DTP 24 插头 | 用于 Extron XTP DTP 24 屏蔽双绞线电缆的屏蔽 RJ-45 插头套件 | |
| XTP DTP 24 打线式插座 | 用于 Extron XTP DTP 24 屏蔽双绞线电缆的屏蔽 RJ-45 打线式插座套件 | |
| CTU 45 | 通用型 RJ-45 端接工具 | |
中国上海市松江区茸华路 686 号
(联系就说在DAV音视工程网上看到的)
Sales-China@Extron.com
021-3760 1566
爱思创电子（上海）有限公司（爱思创Extron中国）全球总部位于美国加州，是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、分配放大器、音频放大器、扬声器、双绞线和光纤设备、视频图像解析度转换器、视音频信号处理器、视音频流媒体产品、教室声场系统及高分辨率电缆。爱思创Extron电子提供专业视音频工程、培训、设计、演示支持。
DAV首页