Extron MTP 15HD RS 系列产品中包括通用的微型双绞线发送器和接收器,用来通过一根非屏蔽双绞线电缆将高分辨率计算机视频和RS-232 串行控制信号远距离发送到演示显示设备.
它们与分辨率高达 1600 x 1200 的信号兼容,可分别将XGA 信号和UXGA 信号发送到185 米和135 米以外。
特性
·输入:用于视频输入的 15 针 HD 插座和用于 RS-232 输入的螺丝锁定器
·输出:用于非屏蔽双绞线的 RJ-45 插座
·峰值预调电路用于优化视频信号的远距离传送质量
·本地监视器缓冲输出
·通过一根CAT 5、5e 或 6 的非屏蔽双绞线电缆发送和接收高分辨率视频信号和双向RS-232 信号到185 米以外
·支持RGBHV、RGBS、RGsB、RsGsBs、分量视频信号、S- 视频信号和复合视频信号
·与双级和三级同步的 HDTV 分量视频兼容
·前面板上配有LED 功率显示
·结构紧凑的 1U、1/4 机架宽粗糙金属机箱
·通用安装选项
·提供外置型国际通用电源,产品编号为 # 70-055-01
示意图
面板图
MTP 15HD RS Series | ||||
Video | ||||
---|---|---|---|---|
Gain | Unity | |||
Number/signal type | 1 set of proprietary analog signals | |||
Connectors | 1 female RJ-45 | |||
Video input and loop-through — transmitter (MTP T 15HD RS) | ||||
Number/signal type | 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video 1 buffered RGBHV, RGBS, RGsB, RsGsBs local monitor loop through (includes ID bits) |
|||
Connectors | 2 female 15-pin HD | |||
Nominal level | 1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video |
|||
Minimum/maximum levels | 0.3 V to 1.45 Vp-p | |||
Impedance | 75 ohms | |||
Horizontal frequency | 15 kHz to 130 kHz | |||
Vertical frequency | 30 Hz to 150 Hz | |||
Return loss | <-30 dB @ 5 MHz | |||
DC offset (max. allowable) | 250 mV | |||
Video output — receivers (MTP RL 15HD RS, MTP RL 15HD RS SEQ) | ||||
Number/signal type | 1 set of proprietary analog signals 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video |
|||
Connectors | 1 female RJ-45 1 female 15-pin HD |
|||
Nominal level | 1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video |
|||
Minimum/maximum levels | 0.3 V to 1.45 Vp-p | |||
Impedance | 75 ohms | |||
Return loss | <-30 dB @ 5 MHz | |||
DC offset | <±20 mV with input at 0 offset | |||
Maximum resolution | 1920x1200 | |||
|
||||
Sync | ||||
Input type (transmitter) | RGBHV, RGBS, RGsB, RsGsBs | |||
Output type (receivers) | RGBHV, RGBS, RGsB, RsGsBs | |||
Standards | NTSC 3.58, NTSC 4.43, PAL, SECAM | |||
Input level (transmitter) | 3.5 V to 5.5 Vp-p, unterminated | |||
Output level (receivers) | 4.0 V to 5.0 Vp-p, unterminated | |||
Input impedance | 510 ohms | |||
Output impedance | 110 ohms | |||
Max. input voltage | 5.5 Vp-p | |||
Polarity | ||||
Transmitter | Positive or negative (follows input polarity) | |||
Receivers | Positive or negative (switch selectable) | |||
Control/remote — external device (pass-through, unidirectional or bidirectional) | ||||
Serial control port input/output | ||||
MTP T 15HD RS | RS-232 via (1) 3.5 mm, 3 pole captive screw connector | |||
Receivers | 1 set of proprietary signals on a female RJ-45 jack | |||
Serial control port output/input | ||||
MTP T 15HD RS | 1 set of proprietary signals on a female RJ-45 jack | |||
Receivers | RS-232 via a 3.5 mm, 3 pole captive screw connector | |||
|
||||
Baud rates | Up to 38400 bps at up to 600' (183 m) (Higher data rates and distances are possible. Performance will vary based on baud rate and cable length.) | |||
Protocol | Data bits = 5 - 8 Stop bits = 1 or 2 Parity = odd, even, none Flow control = XON, XOFF, none |
|||
|
||||
Serial control pin configurations | Captive screw connectors: 1 = TX, 2 = RX, 3 = GND | |||
General | ||||
Recommended cable type | CAT 5/5E/6 (shielded or unshielded) | |||
External power supply | 100 VAC to 240 VAC, 50/60 Hz, external; to 12 VDC, 2 A, regulated | |||
Power input requirements | 12 VDC, 0.5 A | |||
Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
|||
Cooling | Convection, no vents | |||
Mounting | ||||
Rack mount | Yes, with optional 1U, 9.5" deep rack shelf (RSU 129, #60-190-01 or RSB 129, #60-604-01); 1U, 6" deep rack shelf (RSU 126, #60-190-10 or RSB 126, #60-604-10); or VersaTools® 1U, 3.5" deep rack shelf (RSF 123, #60-190-20 or RSB 123, 60-604-20) | |||
Furniture mount | Yes, with optional Mini Under-Desk Mounting Kit, part #70-212-01 (MBU 123) | |||
Pole mount | Yes, with optional projector mounting kit, part #70-217-01 (PMK 100) | |||
Rack mount | ||||
Enclosure type | Metal | |||
Enclosure dimensions | 1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide) (4.3 cm H x 10.9 cm W x 7.6 cm D) (Depth excludes connectors.) |
|||
Product weight | 0.4 lbs (0.2 kg) | |||
Shipping weight | 2 lbs (1 kg) | |||
Vibration | ISTA 1A in carton (International Safe Transit Association) | |||
Regulatory compliance | ||||
Safety | CE, C-tick, CUL, UL | |||
EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI | |||
MTBF | 30,000 hours | |||
Warranty | 3 years parts and labor | |||
|
||||
|
中国上海市松江区茸华路 686 号
(联系就说在DAV音视工程网上看到的)
Sales-China@Extron.com
021-3760 1566
爱思创电子(上海)有限公司(爱思创Extron中国)全球总部位于美国加州,是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、分配放大器、音频放大器、扬声器、双绞线和光纤设备、视频图像解析度转换器、视音频信号处理器、视音频流媒体产品、教室声场系统及高分辨率电缆。爱思创Extron电子提供专业视音频工程、培训、设计、演示支持。